Pre-installed software on IGEP Processor Boards

Overview

If you have a brand new IGEP Processor Board you must know that it comes with a firmware provided and installed on it by ISEE.

By default, if you power up your board it will run the software on the flash. But you can prepare a MicroSD card and boot from it by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.

The pre-installed software consists on a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.

---

The pre-installed software consists on:

• IGEP X-loader: a bootloader compatible with all IGEP Processor Boards.
• IGEP Kernel: a Linux Kernel maintained by ISEE.
• Poky firmware: a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.

For more information about these specific sotware, read the following articles:

• The IGEP X-loader
• The Linux kernel
• Poky firmware

You can also update the pre-installed software of your IGEP Processor Board:

• Update the PRE-INSTALLED software image to a current release