== Overview ==
<section begin=overview />If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.
By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.
The pre-installed software consists of a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.<section end=overview />
== About the pre-installed software ==
The pre-installed software consists of:
*[[The IGEP X-loader]]
*[[The Linux kernel]]<br> *[[IGEP_firmware_YoctoIGEP firmware Yocto|IGEP firmware Yocto]]
= Other useful articles: *[[How_to_create_a_SD-card_with_the_latest_software_image|How to create a SD-card with the latest software image]] *[[Update the PRE-INSTALLED software image =to a current release|Update the PRE-INSTALLED software]] *[[How to boot from MicroSD Card|How to Create a bootable MicroSD card for IGEP devices]]
=== Firmware update ===
You can '''update the pre-installed software''' of your IGEP Processor Board to a current release:
*[[Update the PRE-INSTALLED software image to a current release]]{{Message/Forum}}
=== Create a customized MicroSD === You can also '''create a customized MicroSD''' with specific '''software distributions''': *[[How to boot from MicroSD Card]] [[Category:Software]][[Category:Software distributionsSoftware_distributions]]
