Difference between revisions of "Pre-installed software on IGEP Processor Boards"

From IGEP - ISEE Wiki

Jump to: navigation, search
m
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
= Overview  =
+
== Overview  ==
  
 
If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.  
 
If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.  
  
<br> By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.  
+
By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.  
  
<br> The pre-installed software consists of a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.  
+
The pre-installed software consists of a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.  
  
<br>
+
== About the pre-installed software  ==
 
 
= About the pre-installed software  =
 
  
 
The pre-installed software consists of:  
 
The pre-installed software consists of:  
Line 20: Line 18:
  
 
*[[The IGEP X-loader]]  
 
*[[The IGEP X-loader]]  
*[[The Linux kernel]]<br>
+
*[[The Linux kernel]]  
 
+
*[[IGEP firmware Yocto|IGEP firmware Yocto]]
= Update the software image =
 
 
 
===  Firmware update ===
 
You can '''update the pre-installed software''' of your IGEP Processor Board to a current release:
 
 
 
*[[Update the PRE-INSTALLED software image to a current release]]
 
 
 
 
 
=== Create a customized MicroSD ===
 
  
You can also '''create a customized MicroSD''' with specific '''software distributions''':
+
Other useful articles:
 +
*[[How_to_create_a_SD-card_with_the_latest_software_image|How to create a SD-card with the latest software image]]
 +
*[[Update the PRE-INSTALLED software image to a current release|Update the PRE-INSTALLED software]]
 +
*[[How to boot from MicroSD Card|How to Create a bootable MicroSD card for IGEP devices]]
  
*[[How to boot from MicroSD Card]]
 
  
 +
{{Message/Forum}}
  
[[Category:Software]]
+
[[Category:Software]] [[Category:Software_distributions]]
[[Category:Software distributions]]
 

Latest revision as of 16:09, 2 March 2016

Overview

If you have a brand new IGEP Processor Board you must know that it comes with a firmware provided and installed on it by ISEE.

By default, if you power up your board it will run the software on the flash. But you can prepare a MicroSD card and boot from it by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.

The pre-installed software consists of a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Yocto Platform Builder.

About the pre-installed software

The pre-installed software consists of:

  • IGEP X-loader: a bootloader compatible with all IGEP Processor Boards.
  • IGEP Kernel: a Linux Kernel maintained by ISEE.
  • IGEP firmware Yocto: the software distribution consists of a lite X Window System and GNOME Mobile based applications created with Yocto tools

For more information about these specific sotware, read the following articles:

Other useful articles:


Igep forum.png If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat Irc.png