Changes

== Overview =<section begin=Overview />If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.

By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.

The == About the pre-installed software consists on a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.<section end ==Overview />

= About the pre-installed software = The pre-installed software consists onof:

*IGEP Kernel: a '''Linux Kernel''' maintained by ISEE.*Poky IGEP firmwareYocto: the software distribution consists on of a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder. For more information about these specific sotware, read the following articles: *[[The IGEP X-loader]]*[[The Linux kernel]]*Poky firmware  = Update the software image = === Firmware update ===You can '''update the pre-installed software''' of your IGEP Processor Board to a current release: *[[Update the PRE-INSTALLED software image to a current release]]Yocto tools

You can also '''Other useful articles: *[[How_to_create_a_SD-card_with_the_latest_software_image|How to create a customized MicroSD''' SD-card with specific '''the latest software distributions''':image]] *[[Update the PRE-INSTALLED software image to a current release|Update the PRE-INSTALLED software]] *[[How to boot from MicroSD Card|How to Create a bootable MicroSD card for IGEP devices]]

[[Category:Software]][[Category:Software distributionsSoftware_distributions]]