Changes

== Overview =<section begin=Overview />If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.

By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.

The == About the pre-installed software consists on a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.<section end ==Overview />

The pre----installed software consists of:

The pre*IGEP X-installed loader: a '''bootloader''' compatible with all IGEP Processor Boards. *IGEP Kernel: a '''Linux Kernel''' maintained by ISEE. *IGEP firmware Yocto: the software distribution consists on:of a lite X Window System and GNOME Mobile based applications created with Yocto tools

*IGEP X-loaderFor more information about these specific sotware, read the following articles: a bootloader compatible with all IGEP Processor Boards. *IGEP Kernel: a Linux Kernel maintained by ISEE.*Poky firmware: a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.

Other useful articles: *[[The IGEP XHow_to_create_a_SD-card_with_the_latest_software_image|How to create a SD-loadercard with the latest software image]]*[[The Linux kernelUpdate the PRE-INSTALLED software image to a current release|Update the PRE-INSTALLED software]]*Poky firmware[[How to boot from MicroSD Card|How to Create a bootable MicroSD card for IGEP devices]]

[[Category:Software]][[Category:Software distributionsSoftware_distributions]]