Changes

<section begin=section01 />If you have a brand new IGEP Processor Board you must know that '''it comes with a firmware''' provided and installed on it by ISEE.= Overview ==

By default, if you power up your board it will run the software on the flash. But '''you can prepare a MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.

The == About the pre-installed software consists on a minimal '''Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.<section end ==section01 />

For more information, read the following articlesThe pre-installed software consists of:

*[[The IGEP X-loader]]: a '''bootloader''' compatible with all IGEP Processor Boards. *[[The IGEP Kernel: a '''Linux kernel]]Kernel''' maintained by ISEE. *[[Update IGEP firmware Yocto: the PRE-INSTALLED software image to distribution consists of a current release|Poky Linux]]lite X Window System and GNOME Mobile based applications created with Yocto tools

=See also=*[[Update For more information about these specific sotware, read the PRE-INSTALLED software image to a current release]]following articles:

*[[CategoryThe IGEP X-loader]] *[[The Linux kernel]] *[[IGEP firmware Yocto|IGEP firmware Yocto]] Other useful articles:Work in progress*[[How_to_create_a_SD-card_with_the_latest_software_image|How to create a SD-card with the latest software image]]*[[Update the PRE-INSTALLED software image to a current release|Update the PRE-INSTALLED software]] *[[How to boot from MicroSD Card|How to Create a bootable MicroSD card for IGEP devices]]  {{Message/Forum}} [[Category:Software]][[Category:Software distributionsSoftware_distributions]]