Peripherals Summary
Revision as of 11:35, 24 November 2011 by Pau Pajuelo (talk | contribs)
Revision as of 11:35, 24 November 2011 by Pau Pajuelo (talk | contribs)
Contents
Overview
This article pretends explain the capabilities of most used peripherals in IGEPv2.
Feedback and Contributing
At any point, if you see a mistake you can contribute to this How-To.
Peripherals
UART
UART (universal asynchronous receiver/transmitter) convert parallel data from system bus to serial data through a port. At the destination, a second UART re-assembles this data. Each UART contains a shift register which is the fundamental method of conversion between serial and parallel forms. External signals may be of many different forms, IGEPv2 can handle RS232 and RS485 but not all pads have these standards, the other ones use CMOS level voltage (1V8).
GPIO
How to use GPIOs Example: What can I do with IGEP0020#How_to_handle_the_gpio-LED.27s
SPI
BSP
Under contruction
MMC
Under contruction