4,199
edits
Changes
From IGEP - ISEE Wiki
no edit summary
- SDA: Data. Open-drain output buffer. Requires external pullup resistor. <br>- SCL: Clock, master device generate it. Open-drain output buffer. Requires external pullup resistor. <br>
There are four I2C in Omap, but only three avaliable (I2C4 is used to comunicate with TPS65950). Their caracteristics are:<br>
- Compliance with Philips I2C specification version 2.1<br> -Support for standard mode (up to 100K bits/s), fast mode (up to 400K bits/s) and HS mode for transfer up to 3.4M bits/s<br> -Support for 3-wire/2-wire SCCB master mode for I2C2 and I2C3 modules, 2-wire SCCB master mode for I2C1 module, up to 100K bits/s<br> -7-bit and 10-bit device addressing modes<br> -General call<br> -Start/restart/stop<br> -Multimaster transmitter/slave receiver mode<br> -Multimaster receiver/slave transmitter mode<br> -Combined master transmit/receive and receive/transmit mode<br> -Built-in FIFO for buffered read or write:<br> – 8 bytes for I2C1 and I2C2<br> – 64 bytes for I2C3<br> -Module enable/disable capability<br> -Programmable clock generation<br> -8-bit-wide data access<br> -Low-power consumption design<br> -Two DMA channels<br> -Wide interrupt capability<br>
'''Under construction'''
