Changes

Peripherals Summary

123 bytes removed, 11:46, 20 April 2012

no edit summary

= Overview =

This article wiki pretends introduce the capabilities of most used peripherals in IGEP Boards based in OMAP3530 and DM3730<br>

= Peripherals =

IGEPv2 can handle RS232 and RS485 but not all pads have these standards, Omap UART peripheral use CMOS level voltage (1V8).

Omap 3530 have three UARTs and Omap 3730 (DM3730) have four UARTs. UART4 is not avaliable in IGEPv2, but IGEP MODULE can use it:.<br>

*gpmc_wait3/uart4_rx - J8 pin: UART4 Receive data (input) *gpmc_wait2/uart4_tx - K8 pin: UART4 Transmit data (output) Omap UART peripheral uses can use four signals:

*UART TX: Transmit signal.

[[Category:CommunicationsPeripherals]]

[[Category:Work in progress]]

• ← Older edit

0

edits