Changes

Mux (or multiplexer) is a Omap peripheral that can be controlled via software. Its function is connect other Omap peripherals to some avaliable available Omap pads.

IgepV2 Board have a default mux configuration, but some cases is necessary change it, for example your project need UART2 at j990 connector to transmit data, for this porpouse purpose you need change some mux configurations to enable it and be sure that this modification don't interfere break or interferes in other IC or peripherals. The mux options are vast.

This How-To is meant to be a starting point for people to learn configure mux for IGEP v2 devices as quickly and easily as possible. For this how-to i used [http://releases.linaro.org/platform/linaro-m/headless/final/linaro-m-headless-tar-20101108-2.tar.gz Linaro Headless] and Ubuntu 10.04 with Linaro toolchain.<br>

<br>= Feedback and Contributing = At any point, if you see a mistake you can contribute to this How-To.  = Available peripherals on external connector = The next tables show you all the mux capabilities: === J990 connector ===