4,199
edits
Changes
From IGEP - ISEE Wiki
m
__TOC__ = Introduction =This article is for specific 2.6.37.y Linux kernel branch serie. <br>It is interesting read Go to [[The_Linux_kernel|The Linux kernel article]] previously. On this Kernel 2.6.37.y version, supported IGEP Processor Boards are:* IGEP COM MODULE / ELECTRON (IGEP0030) The currently supported IGEP Expansion Boards are as follows:* IGEP PARIS / BERLIN (BASE0010) Binaries: latest stable kernel version is: '''2.6.37-9 (20140522)''' {| border="1"|-! '''Platform''' ! '''zImage binary''' ! '''Modules binaries'''! '''Modules binaries wilink-8'''|-| IGEP0030 | | | |} = Build kernel from sources = '''Download''' the latest stable version sources and follow next steps: git clone git://git.isee.biz/pub/scm/linux-omap-2.6.git cd linux-omap-2.6 git checkout origin/linux-2.6.37.y-wilink8 -b linux-Linux Kernel 2.6.37.y-wilink8 '''Configure''' Linux kernel for IGEP devices. IGEP is ARM architecture based device. A generic configuration is provided for all IGEP machines, and can be used as the default by make ARCH=arm igep00x0_defconfig Then '''build''' the kernel and kernel modules. The result will be an ''zImage'' file in arch/arm/boot directory. Execute: make ARCH=arm CROSS_COMPILE=[your cross compiler] zImage modules For example, if you are using IGEP SDK Toolchain ([[How to setup a cross compiler]]) then you should execute following cmdline: make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi- zImage modules <br> You can '''install''' the kernel modules to your target rootfs make ARCH=arm CROSS_COMPILE=[your cross compiler] INSTALL_MOD_PATH=[path to your target rootfs] modules_install = Kernel Parameters = This chapter describes some [[How do I edit my kernel command line | kernel command line]] parameters you can pass to the kernel during system startup. They also depend on the presence of the hardware with which they are associated. [[Category:Work in progress]]
Replaced content with 'Go to Linux Kernel 2.6.37.y'
