4,199
edits
Changes
From IGEP - ISEE Wiki
m
__TOC__ = Introduction =This article is for specific 2.6.37.y Linux kernel branch serie. <br>It is interesting read Go to [[The_Linux_kernel|The Linux kernel article]] previously. On this Kernel 2.6.37.y version, supported IGEP Processor Boards are:* IGEP COM MODULE / ELECTRON (IGEP0030) The currently supported IGEP Expansion Boards are as follows:* IGEP PARIS / BERLIN (BASE0010) Binaries: latest stable kernel version is: '''2.6.37-9 (20140522)''' {| border="1"|-! '''Platform''' ! '''Sources''' ! '''zImage binary''' ! '''Modules binaries'''|-| IGEP00x0 | [http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-9/linux-omap-Linux Kernel 2.6.37-9.tar.gz 2.6.37-9] ([http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-9/linux-omap-2.6.37-9.tar.gz.md5 md5sum]) | [http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-9/zImage-2.6.37-9.bin zImage-2.6.37-9.bin] ([http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-9/zImage-2.6.37-9.bin.md5 md5sum]) | [http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-9/modules-2.6.37-9.tar.gz modules-2.6.37-9] ([http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-9/modules-2.6.37-9.tar.gz.md5 md5sum)]|} = Build kernel from sources = '''Download''' the latest stable version sources and follow next steps: wget http://downloads.isee.biz/pub/releases/linux_kernel/v2.6.37-9/linux-omap-2.6.37-9.tar.gz tar xzf linux-omap-2.6.37-9.tar.gz cd [kernel version] Also, it could download from GIT Repositories ([http://git.isee.biz/ http://git.isee.biz/]) and test the last unstable version at your own risk (see "''Linux mainline tree (development)''" chapter in [[The Linux kernel]])<br> '''Configure''' Linux kernel for IGEP devices. IGEP is ARM architecture based device. A generic configuration is provided for all IGEP machines, and can be used as the default by make ARCH=arm igep00x0_defconfig Then '''build''' the kernel and kernel modules. The result will be an ''zImage'' file in arch/arm/boot directory. Execute: make ARCH=arm CROSS_COMPILE=[your cross compiler] zImage modules For example, if you are using IGEP SDK Toolchain ([[How to setup a cross compiler]]) then you should execute following cmdline: make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi- zImage modules <br> You can '''install''' the kernel modules to your target rootfs make ARCH=arm CROSS_COMPILE=[your cross compiler] INSTALL_MOD_PATH=[path to your target rootfs] modules_install = Kernel Parameters = This chapter describes some [[How do I edit my kernel command line | kernel command line]] parameters you can pass to the kernel during system startup. They also depend on the presence of the hardware with which they are associated. [[Category:Work in progressy]]
Replaced content with 'Go to Linux Kernel 2.6.37.y'
