Changes

Now is time to install some packagesif you want to build your own distribution.

</pre> === Build Ubuntu packages === if you're idea is build ubuntu packages then you need install other packages<pre>sudo apt-get install build-essential devscripts dh-make quilt autogen autoconf dh-autoreconf dh-buildinfo dh-make pkg-config</pre>

Now you've in a chroot armhf emulation your rootfs ... &nbsp;

= Install Ubuntu Core 12.04.4 LTS (HF) in the IGEPv5 =

Ubuntu 12.04.4 LTS can be installed in MicroSD Card, the internal eMMC Flash or in a SSD Flash card, the minimum suggested capacity will be is 8 GiB available.

Ubuntu 12.04.4 LTS can be downloaded from our server at this [http://downloads.isee.biz/pub/igepv5_ce/arm-ubuntu/images/ubuntu-12.04.4-LTS-hf location] this is a unmodified ubuntu 12.04.4 image without any package. This distribution is based on [https://wiki.ubuntu.com/Core Ubuntu Core]<br>Ubuntu 12.04.4 LTS (with ISEE modifications) can be downloaded from our server at this [http://downloads.isee.biz/pub/igepv5_ce/releases/ location] &nbsp; all support is based on this distribution.<br>'''The changelog is located inside the /root directory root<br>'''User '''root '''password''': letmein<br> '''User '''igep '''password''': igep'''

<span style="color: rgb(255, 0, 0);">Note: remember remove the qemu-arm-static file after all.&nbsp;<br/span> Note: remember unmount (outside chroot) the sys proc and dev with:for m in `echo 'sys dev proc'`; do sudo umount ./$m; done</span>

Now we can edit the files and tunning the setup

<pre>root::16104:0:99999:7:::</pre>==== Add password for root user<divbr> ==== Enter as root user and set the password with: <brpre> $ passwd</divpre>

Proxy &lt;corporate apps address&gt;:&lt;port number&gt;; Proxy::&lt;ubuntu corporate address&gt; "DIRECT";

</pre> == Prepare your disk (microsd, eMMC or SSD disk) ==

Insert the disk in your PC or IGEPv5 and after that execute lsblk as:<br> mmcblock is for microsd card or eMMCsda is for your ssd disk 

In this case p1 (boot)&nbsp;and p2 (rootfs).

== Install First you need prepare your image in a SATA SSD Disk ==disk, check previous point.

Comming soon First you need prepare your disk, check previous point.  Ubuntu 12.04.4 LTS (with ISEE modifications) can be downloaded from our server at this [http://downloads.isee.biz/pub/igepv5_ce/releases/ location]&nbsp; all support is based on this distribution.<br> '''The changelog is located inside the /root directory<br> '''User '''root '''password''': letmein<br> '''User '''igep '''password''': igep'''  Mount your eMMC in your IGEPv5 after mount the disk it should show you two partitions, the first one boot when we will copy the MLO and u-boot.img and the second one where we uncompress the downloaded file.  You can see the eMMC disk as MMC disk, take a look with the names just if you've the microsd plugged ...  === Mount the eMMC partitions === Use the command mount if automount is not enabled as <pre>mount /dev/mmcblk0p1 /mnt/p1 mount /dev/mmcblk0p2 /mnt/p2</pre> Copy MLO and u-boot.img (both files can be downloaded reside inside the package u-boot-xxxxxxx-omap5-isee.tar.bz2) inside /mnt/p1 <pre>cp MLO u-boot.img /mnt/p1</pre> go to /mnt/p2  Now uncompress the rootfs (downloaded file) <span style="color: rgb(255, 0, 0);">as root</span> <pre>cd /mnt/p2 sudo tar xvfj ubuntu-core-12.04.4-isee-XXXXXXXXXXX-armhf.tar.bz2 (where xxxxxxx is the release name)</pre> Sync disk <pre>$ sync</pre> Unmount the disks <pre>umount /mnt/p1 umount /mnt/p2</pre> Reboot the board (remember set the board dips in the right boot setup)  == Special Warning about MicroSD Card and eMMc == The microsd card uses the interface mmc as the eMMC in some cases as when you boot from your microsd card the lsblk command can show you two mmc devices:  /dev/mmcblk0 <br> /dev/mmcblk1 <br>  Normally the 0 is the boot device (from where you boot), if you use the microsd card for boot&nbsp;: /dev/mmcblk0 and the eMMC is the /dev/mmcblk1 but if you boot from the eMMC and insert the microsd card then the eMMC is /dev/mmcblk0 and the microsd card be /dev/mmcblk1 <br> If you use the script for prepare the disk first be sure about which is your desired target due you can easily erase other disk.  = WORK WITH PACKAGES = Maybe if you used ubuntu before you are familiar with the apt use, this is only an a introduction to apt use:<br> If you wish install a new package you should use: <pre>$ apt-get install &lt;package name&gt;$ apt-get install openssh-server</pre> If you wish locate any package you can use: <pre>$ apt-cache search &lt;name&gt;</pre> it list the concordances with name, maybe it's useful use an alternative command: <pre>$ apt-cache search &lt;name&gt; | grep "any string"</pre> If you wish remove any package you can use: <pre>$ apt-get remove &lt;package name&gt;</pre> If you wish list the package content you can use: <pre>dpkg -L &lt;package name&gt;</pre> If you wish list the packages installed in your system you can use: <pre>dpkg -l</pre> or if you wish locate one: <pre>dpkg -l &lt;name&gt;</pre> = BUGS = The Bug tracking server is located [http://bug.isee.biz here], the bug tracking is open to all customers and there you can put your found bugs, requesting features or changes ...<br>  = CONTRIBUTE = Please login in this wiki page with the same username and login that you use in the www.isee.biz page and put here your comments or improvements. You can write your comments or ask any question using our [http://www.isee.biz/support support forum]  = References =

httphttps://www.omappediagithub.com/wikiDavidBercovitz/OMAP_Ubuntu_Core#Chroot.27ing_into_the_Ubuntu_Core_Filesystemubuntu-core

https://wiki.ubuntu.com/Core/InstallationExample

http://cdimagewww.ubuntumattfischer.com/ubuntu-coreblog/?p=514

https://githubwiki.ubuntu.com/DavidBercovitz/ubuntu-corePbuilderHowto

httpshttp://wikimanpages.ubuntu.com/Coremanpages/InstallationExamplelucid/man8/pbuilder.8.html

https[[Category://wiki.ubuntu.com/PbuilderHowtoUbuntu]][[Category:Software distributions]]