Changes

<pre>$ flash_eraseall /dev/mdt0 mtd0

== Install the Bootloader ==Download the writeloader binary package from [http://downloads.isee.biz/pub/isee-releases/ubuntu/ubuntu-12.04.04-lts-armel-armhf/isee-writeloader-bin-armel_0.01_armel.deb here]ARMEL version or from [http://downloads.isee.biz/pub/isee-releases/ubuntu/ubuntu-12.04.04-lts-armel-armhf/isee-writeloader-bin-armhf_0.01_armhf.deb here]if you are using hard float version.

Download After download the writeloader binary appropriate package from [http://downloads.isee.biz/pub/distros/ubuntu/isee-writeloader-bin-armel_0.01_armel.deb here] ARMEL version or from [http://downloads.isee.biz/pub/distros/ubuntu/isee-writeloader-bin-armhf_0.01_armhf.deb here] if you are using hard float version. we're ready for install the bootloader in the internal flash

After download the appropiate package we're ready for install the bootloader in the internal flash ARMEL version <pre>$ writeloader-armel -i /boot/MLO -o /dev/mtd0</pre>ARM Hard float version <pre>$ writeloader-armhf -i /boot/MLO -o /dev/mtd0</pre>

and after that we can unmount the device as <pre>$ cd ..$ umount /mnt</pre> Now we will edit the file /boot/igep.ini (using nano) due we must specify the root boot partition.<br> Find inside the file any line similar to this one and comment it:

and after that we can unmount the device as <pre>$ cd ..$ umount /mnt</pre>  == Install the Rootfs (Using Ubi filesystem) ==a) Format the partition with ubi <pre>$ ubiformat /dev/mtd2</pre>b) Attach the device

a) Format the partition with ubi <pre>$ ubiformat /dev/mtd2</pre> b) Attach the device <pre>$ ubiattach -p /dev/mtd2</pre> c) Create the ubi volume  <pre>$ ubimkvol /dev/ubi0 -N rootfs -s 486MiB</pre> d) Download the [http://downloads.isee.biz/pub/distrosisee-releases/ubuntu/ubuntu-12.04.04-lts-armel-armhf/ubuntu-12.04.04-lts-isee-igep00x0-20140606-armel.ubi.img ubi ubuntu 12.04.4 LTS armel image] or [http://downloads.isee.biz/pub/isee-releases/ubuntu/ubuntu-12.04.04-lts-armel-armhf/ubuntu-12.04.04-lts-isee-igep00x0-20140606-armhf.ubi.img ubi ubuntu 12.04.4 LTS armhf image] [http://downloads.isee.biz/pub/distros/ubuntu/ubuntu-12.04.04-lts-isee-igep00x0-20140606-armhf.ubi.img ] '''NOTE''': This image is generated using this command:

</pre> Where:  ubuntu-12.04.04-lts-isee-igep00x0-armel: Is the rootfs uncompressed directory ubuntu-12.04.04-lts-isee-igep00x0-20140606-armel.ubi.img&nbsp;: Is the ubi generated image e) Copy the ubi ubuntu image inside your board You can use ssh (the image has a openssh server installed) or you can install wget tool and download the image directly.

f) Install the ubi ubuntu-12.04.04-lts-isee-igep00x0-image if you want to use the armelimage do: Is the rootfs uncompressed directory<br>

<pre>$ ubiupdatevol /dev/ubi0_0 /root/ubuntu-12.04.04-lts-isee-igep00x0-20140606-armel.ubi.img&nbsp;: Is the ubi generated image<br/pre> or the hard float alternative

e<pre>$ ubiupdatevol /dev/ubi0_0 /root/ubuntu-12.04.04-lts-isee-igep00x0-20140606-armhf.ubi.img</pre>g) Copy Mount the ubi ubuntu image inside your board You can use ssh (the image has a openssh server installed) or you can install wget tool partition and download verify the image directly. content

== Boot from Flash Use the same root password (first time"letmein" - is the default) == Mount manually the boot partition with this command: <pre>$ mount -t jffs2 /dev/mtdblock1 /boot </pre> After mount the boot partition go to /root/packages and install the kernel with: <pre>$ dpkg -i linux-image-2.6.37_0009.isee_armel.deb</pre> and after that install the wifi firmware with <pre>$ dpkg -i igep-fw-wifi-marvell-8686_0.1_all.deb</pre> At leatest go to /boot directory and copy the file vmlinuz-2.6.37 as zImage <pre>$ cd /boot $ cp vmlinuz-2.6.37 zImage </pre> Now you can reboot the board ... after that you've the ubuntu installed into the Nand Flash memory

Unplug the power cord and eject the microsd card then plug the power cord again== Known issues ===== ISSUE - Booting device shows: The disk drive for /boot is not ready yet or not present. ===During the reboot process the console will show you this message: