1,381
edits
Changes
From IGEP - ISEE Wiki
no edit summary
sdb 8:16 1 3.8G 0 disk
Select the disk: [sdx or mmcblkx]
</pre>
Here you should write the device name in our case sdb
<pre>
sdb
sdb
Are your sure? Y/n
y
</pre>
If you're sure that is your device then you should aswer yes and the process will start.
<pre>
1024+0 records in
1024+0 records out
Writing superblocks and filesystem accounting information: done
</pre>
After finish the microsd card will be ready for install the Ubuntu the microsd card will show you two partitions, the first one formated with FAT32 and the second one formated with EXT4.
TIP: If the microsd card is not mounted remove the microsd card and insert it again or mount the card manually.
