1,381
edits
Changes
From IGEP - ISEE Wiki
→Download the Ubuntu 12.04.4 LTS Distribution and tools
== Host Enviroment ==
We suggest use Ubuntu 12.04.4 LTS (32 bits) in your host, you can download it from our server using this [http://downloads.isee.biz/pub/igepv5_ce/devel/iso/ubuntu-12.04.4-desktop-i386.iso link] or directly from Ubuntu (Canonical) website. You can install it in a Virtual Machine enviroment environment using any Virtualization software or directly in your PC.
=== Material<br> ===
*HDMI/DVI Monitor (optional)
== Download the Ubuntu 12.04.4 LTS Distribution and tools<br> ==The Ubuntu 12.04.4 LTS (armel) distribution can be [http://downloads.isee.biz/pub/isee-releases/ubuntu/ubuntu-12.04.04-lts-armel-armhf/ubuntu-12.04.04-lts-isee-igep00x0-20140606-armel.tar.bz2 downloaded from here] or if you want to use the [http://downloads.isee.biz/pub/isee-releases/ubuntu/ubuntu-12.04.04-lts-armel-armhf/ubuntu-12.04.04-lts-isee-igep00x0-20140606-armhf.tar.bz2 hard float version you can use this].
The Ubuntu 12.04.4 LTS distribution can first boot must be done using the [http://downloads.isee.biz/pub/distrosisee-releases/ubuntu/ubuntu-12.04.04-lts-armel-armhf/ubuntu-isee-igep00x0-first-boot-20140606-armel.tar.bz2 downloaded from herefirst boot package] or if , inside you want to use 've the hard float version you should use this other linkbootloader, igep.ini and temporary kernel (its valid for armel and armhf).<br>
=== Check if you've the packages bc and dosfstools<br> ===
<pre>$ cd /media/boot
$ tar xvfj ubuntu-12.04.4-isee-igeo00x0igep00x0-first-boot.tar.bz2</pre> After incompress uncompress the content you should see inside the /media/boot these content:
<pre>$ zImage MLO igep.ini </pre>
The default configuration is set for boot IGEPv2 board if you wish boot the IGEP COM Module or IGEP COM Proton then you must edit the file igep.ini and set the variable:
Save the file
Now enter into the rootfs partiton partition (normally mounted on /media/rootfs) and uncompress the ubuntu 12.04.4 package on it as: <pre>$ sudo tar xvfj ubuntu-12.04.04-lts-isee-igep00x0-20140606-armel.tar.bz2 or if you use hard float:$ sudo tar xvfj ubuntu-12.04.04-lts-isee-igep00x0-20140606-armhf.tar.bz2 </pre> After that sync and eject the microsd card.
== First Time Boot<br> ==
$ dpkg -i igep-fw-wifi-marvell-8686_0.1_all.deb
$ dpkg -i dpkg -i igep-fw-wifi-ti-wl1271_0.1_all.deb
</pre>
Due the first partition uses FAT32 is not possible create symbolic links to the kernel image installed, after install the package go to /boot directory
=== Users ===
The package include the igep user.<br>Username: igep<br>Password: igep
=== Configure the Ethernet ===
dhcpd is already installed but not configured follow the next steps for setup the ethernet port:
a) Edit the file (using nano) /etc/network/interfaces <br>b) At end add these lines: <pre>auto eth0
iface eth0 inet dhcp
</pre>=== Update package database ===
== Changelog ... ==
This package is based on Ubuntu 12.04.4 Core with some extra packages.<br> You can read the complete log reading the Changelog included into the root directory.<br>
<br>
[[Category:Ubuntu]][[Category:Software distributions]]
<br>