0
edits
Changes
From IGEP - ISEE Wiki
m
*'''Custom designs''': Customized IGEP Technology devices with specific peripherals | [http://www.isee.biz]
→Z
=A=
*'''Analog to Digital Converters (ADC)''': | [[:Category:Peripherals]]
*'''Android''': | [[:Category:Software distributions]]
*'''ARM architecture''': based on 32-bits processors suitable for low power applications | [http://en.wikipedia.org/wiki/ARM]
*'''Audio In/Out''': definition | [[How to use the audio interface]] | [[:Category:Audio]]
=C=
*'''Camera interface''': | [[:Category:Peripherals]]
*'''CAN bus''': [[How to use CAN bus]] | [[:Category:CAN bus]]
*'''Kernel Command Line''': [[How do I edit my kernel command line]]
*'''Communications with IGEP devices''': you can communicate with a IGEP Processor board via Serial port, Ethernet, Wifi, USB Ethernet Gadget, etc. | [[:Category:Peripherals]]
*'''Debug console''': is a mechanism for interacting with the IGEP Processor operating system [host] by typing commands in your client machine to perform specific tasks. You can communicate and open debug sessions via Serial port, SSH, etc. | [[Using serial debug port to communicate|Using serial debug port to communicate]] | [[:Category:UART]]
*'''Cross compile''': to generate executables for an embedded system or a diferent platform from which the compiler is run | [[The Linux kernel#How to cross compile the linux kernel|Cross compile the Linux Kernel]] | [[How to setup a cross compiler]] | [[:Category:Development]]
*'''Custom designs''': Customized IGEP Technology devices with specific peripherals | [http://www.isee.biz ISEE]
*'''Customize the software''': Install custom software distributions | [[How to boot from MicroSD Card]] | [[Category:Software distributions]]
=D=
*'''Developing under IGEP Technology devices''': [[Start developing under IGEP Technology]] | [[:Category:Development]]
*'''Documentation''': many IGEP Technology devices include Features description, Hardware Manual, Schematics, Pinout or Mechanical characteristics, etc. | [http://www.isee.biz]
*'''DSP''': definition | [[:Category:Peripherals]]*'''DSP Framework''': | [[How to use IGEP DSP framework]] | [[:Category:Peripherals]]
*'''DVI''': definition | [[:Category:Peripherals]]
=F=
*'''FAQ''': [[Frequently Asked Questions and Their Answers]]
*'''IGEP devices features''': check the main features of many IGEP Technology devices | [[:Category:Features|Features]] | [http://www.isee.biz]
*'''IGEP Firmware''': [[Pre-installed software on IGEP Processor Boards]]
*'''Flash your MicroSD firmware''': copy your downloaded firmware from your MicroSD to the flash| [[Update the PRE-INSTALLED software image to a current release#How to flash the latest software image|Flash your MicroSD firmware]] | [[How to run a ubifs on IGEP boards|Flash using Ubifs]] | [[:Category:Software]]
*'''IGEP devices featuresCommunity Forum''': check the main features of many IGEP Technology devices | [[http:Category:Features|Features]] | [www//forum.isee.bizForum]
*'''Boot from the Flash''': create a MicroSD card and flash it to your IGEP Processor Board | [[Update_the_PRE-INSTALLED_software_image_to_a_current_release#How to flash the latest software image|Flash the latest software image]] | [[:Category:Software]]
=M=
*'''Kernel modules''': | [[How to manage the kernel modules on Linux]] | [[:Category:Development]]
*'''OMAP Mux Configuration(multiplexor)''': setup the modes of the OMAP pad multiplexor for using with different peripherals (UART, DSS, GPIO, I2C, etc.) | [[Mux configuration]] | [[:Category:Peripherals]]*'''MicroSD''': those IGEP Processor Boards with MicroSD card readers can boot from MicroSD by setting the right configuration, partitions and software installed on the card | [[How to boot from MicroSD Card]] |Boot from MicroSD Card[[Update the PRE-INSTALLED software image to a current release]] | [[:Category:Software]]
*'''MMC''': Multimedia Controller, a peripheral than can manage SD/MMC/SDIO | [[Peripherals Summary#MMC|MMC]] | [[:Category:Peripherals]]
=R=
*'''IGEP Radar''': the Radar Technology from ISEE with many devices | [[:Category:IGEP Radar|IGEP Radar]] | [http://www.isee.bizISEE]
*'''Real Time in IGEP Technology''': Real Time can be aproached with IGEP Technology devices by selecting the write software distribution, optimizing the application with the right compiler, reducing the kernel modules, etc. | [[:Category:Software distributions|Software distributions]] | [[:Category:Development]]
*'''Root File System (rootfs)''': is the filesystem that is contained on the same partition on which the root directory is located (for example: /usr /etc /bin ...). It is necessary to set a separate partition for the rootfs when booting from a MicroSD card | [[How to boot from MicroSD Card| Boot from MicroSD Card]] | [[:Category:Software]]
*'''Boards revisions''': | [[Frequently Asked Questions and Their Answers#Which IGEP board do I have?| Check board revisionTechnology devices revisions]]
*'''RS232''': | [[How to use UARTs]] | [[:Category:UART]]
*'''RS485''': | [[How to use RS485 on IGEP0020 board]] | [[How to use UARTs]] | [[:Category:RS485]]
*'''Update Software''': | [[Update the PRE-INSTALLED software image to a current release|Update the Pre-Installed Software image]] | [[:Category:Software]]
*'''USB Ethernet Gadget''': can be used to communicate with an IGEP Processor Board (if included) | [[Using USB ethernet gadget to communicate|Communicate via USB Ethernet Gadget]]
*'''USB OTG''': | [[:Category:PeripheralsUSB]]*'''USB Host''': | [[:Category:PeripheralsUSB]]
=V=
*'''IGEP SDK Virtual Machine''': [[Ubuntu 8.04 IGEP v2.0 SDK Virtual Machine]]
*'''QEMU Virtual Machine''': [[QEMU]]
=X=
=W=
*'''Wifi''': can be used to comunicate with an IGEP Processor Board (if included) | [[Using IGEP WLAN to communicate|Communicate via Wifi]] | [[How to setup Marvell 88w8686 SDIO wifi#How to get WIFI active upon system start (using a WPA2 access-point)|Set Wifi upon system start]] | [[:Category:Wifi]]
*'''IGEP Community Wiki''': [[IGEP Community Wiki]]
=Z=
{{Message/Forum}}
[[Category:Work in progress]]
[[Category:Resources]]
__NOTOC__
