Difference between revisions of "IGEP SMARC iMX6"

From IGEP - ISEE Wiki

Jump to: navigation, search
Line 247: Line 247:
 
||
 
||
 
|}
 
|}
[[IGEP SMARC iMX6]]
+
[[Category:IGEP SMARC iMX6]]

Revision as of 11:45, 6 April 2018

SMARC module SINGLE/DUAL/QUAD core ARM Cortex-A9 up to 1200 MHz

IGEP smarc imx6.jpg
IGEP SMARC iMX6
Highlight Possible Applications
  • Freescale i.MX6 Cortex-A9 Solo, Dual-Lite, Dual and Quad up to 1.2GHz
  • 1GB DDR3L (2GB Option, Solo=512MB), 4GB eMMC Flash, 1x SD/MMC, 1x SATA (D/Q)
  • Parallel 18/24-bit RGB, 24-bit dual-chann. LVDS, HDMI
  • 1 x 10/100/1000Mbps LAN
  • 2 x CAN, 4 x UART, 5 x I2C, 2 x I2S, 1 x PCIe, 12 x GPIOs, 2 x SPI, 4-LANE Serial Camera Interface


  • Human Machine Interface (HMI)
  • Rear Seat Entertainment Systems
  • In-Freight Entertainment
  • The Internet of Things (IOT)
  • Medical-CT Scanner
  • Digital Signage
  • Point of Sales
  • Display Units
  • General Control Systems
  • Smart Grid
  • HVAC Control System


Technical information

Processor

iMX6 Solo/DualLite/Dual/Quad, by NXP Semiconductors
Up to 4 x ARM Cortex-A9 MPCore
NEON SIMD Coprocessor
Frequency speed up to 1200 MHz (depending on model)

3D/2D Accelerator Vivante GC2000 or GC880 (depending on model), GC355 and GC320,

providing 2D/3D acceleration with OpenGL-ES2.0 and OpenVG 1.1 support.

Video

Video acceleration: H.264, H.263, MPEG-2 and MPEG-4

Memory

RAM: 512 MB, 1 GB or 2 GB DDR3
eMMC Flash: 4 GB or 8 GB eMMC
SPI Flash (optional)
EEPROM

Ethernet

10/100/1000 Mbps Ethernet PHY Interface

USB

1 x USB 2.0 Host
1 x USB 2.0 OTG

Display

1 x LVDS (4 lanes)
1 x HDMI 1.4a (with audio)
1 x MIPI DSI (2 lanes)

Image Capture Interface 1 x MIPI CSI2 interfaces (4 lanes Dual/Quad version, 2 lanes Solo/DualLite version)
Wireless

WiFi IEEE 802.11 b/g/n (Access Point: Yes)
Bluetooth v4.0 (BLE)

Antenna

1 x Internal WiFi/Bluetooth antenna
1 x U.FL connector for external antenna

Additional Interfaces

3 x UART (4 x No WiFi version)
4 x I2C (3 x Dual/Quad version)
1 x MMC
1 x I2S (2 x No WiFi version)
2 x SPI
2 x PWM
2 x CAN
1 x SDIO
12 x GPIO
1 x JTAG Interface
1 x SATA II (Dual/Quad version)
1 x PCIe v2.0 (1 lane) (Dual/Quad version)

SW Support Linux
Power Supply Power from expansion connectors: From 4,7 V to 5,25 V
Digital I/O voltage: 1,8 V
Power Consumption Typical 1,8 W (depending on software) (Quad version)
Maximum 6 W (depending on software) (Quad version)
Thermal Commercial temperature: 0 ºC to +60 ºC
Industrial temperature: -40 ºC to +85 ºC
Form Factor 82,00 mm x 50 mm by SMARC Specifications
Humidity 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF > 100000 hours


 

 Evaluation Baseboard

Peripherals
1 x Button LED
  3 x Boot jumpers
  1 x SPI
  1 x I2C
  1 x MMC
  1 x CAN transceiver
  1 x RS485
  2 x RS232
  1 x Audio codec
   
Connectors 1 x SMARC connector
5 V Power Supply
1 x 10/100/1000 Mbps Ethernet PHY Interface
  1 x HDMI 1.4a output type A receptacle
3 x USB 2.0 type A receptacle
1 x USB 3.0 type micro AB receptacle
  1 x Serial RS232 3V3 expansion header
1 x Serial TTL 3V3 debug header
1 x Stereo Line Audio mic In mini jack
  1 x Stereo Line Audio Out mini jack
1 x LVDS connector (with power supply, touch interface and EDID information)
1 x CSI connector (Raspberry Pi camera compatible)
  1 x Terminal 5 pins plug
1 x I/O Expansion 28 pins header
1 x Modem USB interface
  1 x mSATA interface
1 x Micro SD connector
  Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)
   
Power Power from expansion connectors: 5V
Power from jack power: 5V
   
SW Support Linux
   
Thermal Commercial temperature: 0 ºC to +60 ºC
Industrial temperature: -40 ºC to +85 ºC
   
Form Factor 142 mm x 90 mm

Versions

Model Description
IGEP0046 - RA  
IGEP0046 - RB  
IGEP0046 - RC  
IGEP0046 - RD  

Firmware

Documentation

Software

Getting started with IGEP SMARC iMX6

Ubuntu/Debian Guides

Yocto Guides