Difference between revisions of "IGEP COM MODULE"
From IGEP - ISEE Wiki
(→Firmware) |
|||
Line 144: | Line 144: | ||
===Software=== | ===Software=== | ||
* [http://downloads.isee.biz/pub/isee-releases/ubuntu/xenial_16.04_lts/ubuntu-xenial-armhf-igep-base-v0.01.tgz Ubuntu Xenial 16.04 LTS ARM Hard Float] | * [http://downloads.isee.biz/pub/isee-releases/ubuntu/xenial_16.04_lts/ubuntu-xenial-armhf-igep-base-v0.01.tgz Ubuntu Xenial 16.04 LTS ARM Hard Float] | ||
+ | * [http://downloads.isee.biz/pub/relaunch/rootfs/debian/stretch/debian-stretch-armhf-igep-base-no-version.tgz Debian Stretch ARM Hard Float] | ||
+ | * [http://downloads.isee.biz/pub/relaunch/rootfs/yocto/pyro/minimal/igep0030hf-yocto-pyro-minimal-base-no-version.bz2 Yocto Pyro ARM Hard Float] | ||
+ | * [http://downloads.isee.biz/pub/relaunch/rootfs/buildroot/skeltal/igep-buildroot-skeltal-base-no-version.bz2 Buildroot ARM Hard Float] | ||
==<span dir="auto">Getting started with IGEP COM MODULE<br /></span>== | ==<span dir="auto">Getting started with IGEP COM MODULE<br /></span>== |
Revision as of 10:21, 17 September 2018
Contents
Small module SINGLE core ARM Cortex-A8 up to 1000 MHz
The IGEP COM MODULE is an industrial processor board. It can be used as a computer-on-module for your product. The IGEP COM MODULE provides a lot of features in a small size. You can build your project anywhere you want.
Features | |
---|---|
Processor |
DM3730 / AM3703, by Texas Instruments |
3D/2D Accelerator | PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (Only in DM3730 version) |
Video |
Video acceleration: H.264, H.263, MPEG-4, MPEG-2, JPEG, WMV9 and additional codecs. Video encoder/decoder up to 720p (Only in DM3730 version) |
Memory | RAM: Up to 512 MB Mobile DDR (Standard setup 512 MB) Flash: Up to 512 MB (Standard setup 512 MB) Onboard micro-SD card socket |
Ethernet |
No |
USB |
1 x USB 2.0 Host (connector not included) |
Display |
1 x Digital Video/TFT interface |
Image Capture Interface | 1 x CPI interface (12 bits) |
Wireless |
WiFi IEEE 802.11 b/g/n (Access Point: Yes) |
Antenna |
1 x Internal WiFi/Bluetooth antenna |
Additional Interfaces
|
4 x UART |
SW Support | Linux Android |
Power Supply | Power from expansion connectors: From 3,5 V to 4,2 V Digital I/O voltage: 1,8 V |
Power Consumption | Typical 1 W (depending on software) Maximum 2 W (depending on software) |
Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
Form Factor | 18 mm x 68.5 mm Gumstix compatible |
Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
MTBF | > 100000 hours |
Options |
|
---|---|
Processor |
|
Grade |
|
Main Memory |
|
Flash Memory |
|
Wireless |
|
3D/2D Accelerator - Video |
|
Firmware
Tutorials
- U-boot Bootloader
- Linux Kernel
- How to boot from MicroSD Card
- Boot from NAND/eMMC flash.
- IGEP Firmware Yocto
- IGEP Firmware Ubuntu
- IGEP Firmware Debian
Documentation
- DM3730
- Pre-installed_software_on_IGEP_Processor_Boards
- Update_the_PRE-INSTALLED_software_image_to_a_current_release
Software
- Ubuntu Xenial 16.04 LTS ARM Hard Float
- Debian Stretch ARM Hard Float
- Yocto Pyro ARM Hard Float
- Buildroot ARM Hard Float