IGEP COM AQUILA

From IGEP - ISEE Wiki

Revision as of 10:18, 25 September 2018 by Jose Miguel Sanabria (talk | contribs)

Jump to: navigation, search

SODIMM module SINGLE core ARM Cortex-A8 up to 1000 MHz

IGEP COM AQUILA.jpg


The IGEP COM AQUILA is an industrial processor module and it can be used as a computer-on-module for your product. The IGEP COM AQUILA provides a lot of features in a small size. You can build your project anywhere you want. 


Features

 
Processor

AM3354 (Standard Setup) / AM3352 / AM3358 / AM3359, by Texas Instruments
ARM Cortex-A8
NEON SIMD Coprocessor
Frequency speed up to 1000 MHz (depending on model)

3D/2D Accelerator PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model)
Memory RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB)
FLASH: 128 MB up to 512 MB (Standard setup 128 MB)
Onboard micro-SD card socket
Ethernet

10/100 Mbps Ethernet PHY interface

USB

1 x USB 2.0 Host
1 x USB 2.0 OTG

Display

1 x Digital Video/TFT interface (24-bits)

Additional Interfaces

(Other combinations available, see Hardware Manual for more information)

1 x I2C
1 x CAN
1 x SPI
14 x GPIOs
1 x McASP/I2S (Digital Serial Audio Interface)
1 x PWM
8 x ADC
3 x UART
2 x MMC (one used into onboard micro-SD socket)
GPMC External Bus
JTAG Interface

SW Support Linux
Android
Power Supply Power Supply: 5 V
Digital I/O voltage: 3,3 V
Power Consumption Typical 1,2 W (depending on software)
Maximum 1,5 W (depending on software)
Thermal Commercial temperature: 0 ºC to +60 ºC
Industrial temperature: -40 ºC to +85 ºC
Form Factor 67,60 mm x 26,00 mm
Ka-Ro Electronics TX48 Form Factor Compatible
Humidity 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF > 100000 hours


Options

 
Processor
  • AM3352, by Texas Instruments
  • AM3354, by Texas Instruments
  • AM3358, by Texas Instruments
  • AM3359, by Texas Instruments
    ARM Cortex-A8
    Frequency speed up to 1000 MHz
Grade
  • Commercial temperature: 0 ºC to +60 ºC
  • Industrial temperature: -40 ºC to +85 ºC
Main Memory
  • 128 MB DDR3
  • 256 MB DDR3
  • 512 MB DDR3
Flash Memory
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB
Wireless
  • No WiFi/Bluetooth
  • WiFi IEEE 802.11 b/g/n (Access Point: yes)
  • WiFi IEEE 802.11 a/b/g/n (Access Point: yes)
Fast Ethernet
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB
Gigabit Ethernet
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB
DVI-D
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB


Documentation

Tutorials

  1. IGEP COM AQUILA Boot Pin-out.
  2. How to prepare a ready to boot firmware.
  3. U-Boot Bootloader.
  4. Linux Kernel.
  5. IGEP Firmware set-up.
  6. Boot from MicroSD Card.
  7. Boot from NAND/eMMC flash.
  8. Update Installed IGEP Firmware.

Firmware

Official

Custom

Guides

Getting started with IGEP COM AQUILA

Ubuntu / Debian

Yocto