4,199
edits
Changes
From IGEP - ISEE Wiki
m
→IGEP0040-RA03 version - Micron memory
* Overall consumption: 5V@0.21A ---> OK, less than Qseven and Sondrio but not dangerous
* Removed Standalone Marvell debug flex connector ---> OK. Broken some NC pads from footprint
* Add wires to get acces to JTAGB connector ---> OK
* Test 25 MHz crystal --> add R950. OK
* Test power pin decoupling mounted resistors--> OK
* Add PU (4K7) to PRI_TRST into board. The others PU has been added to converter --> OK
* Mounted 26 MHz oscillator --> OK
* Umount all POWER bad resistors --> OK
* Add 330 nF to 3V3 enable LDO to delay 3_3P3 power source (RC: 10K/330nF) ---> OK
* Add 0R to R75 and R80 ---> OK
* Mount R931 to get access directly to eMMC ---> OK
=== Homemade JTAG black stone / JTAGB connector ===
