4,199
edits
Changes
From IGEP - ISEE Wiki
m
→BUG ALL_01: (IMPORTANT) Missing 1V8 26MHz Oscillator
- Tested with oscilloscope VCXO_IN signal
----
=== BUG ALL_02: Marvell flat connector mounted ===
'''WORKAROUND:''' Use a 1.27 mm header instead to allow get access to signals easier
- Mount JTAGB
- Umount JTAG
----
=== BUG ALL_03: PRI_TRST is low, has no PU===
'''WORKAROUND:''' Use PU resistor to V_1P8 to pull high this signal. This resistors should be added to Layout. '''Need to check if this bug is important'''
----
=== BUG ALL_04: (IMPORTANT) Remove power bad resistors===
'''INFO:''': This resistors disables power sequence from power switch and LDOs to PXA2128
'''WORKAROUND:''' Disable this SMARC feature
- Umount: R971, R972, R973, R974 and R975
----
