IGEP0030 Features
From IGEP - ISEE Wiki
IGEP module
ISEE IGEP MODULE is the new computer on module designed by ISEE for industrial and commercial market, that communicates via 802.11b/g, Bluetooth 2.0 and USB, is low cost, high performance and production ready.
IGEP MODULE can be used as a computer-on-module for your product but also as an stand alone computer without the need of a baseboard. You don't need anything else than a USB cable to power the IGEP MODULE and communicate with it by using USB OTG interface.
- Processor: OMAP3503 and OMAP3530. Applications Processor with ARM Cortex-A8 CPU, a C64x+ digital signal processor (DSP) core, and the POWERVR SGX for 2D and 3D graphics acceleration
* Memory:
o 128MByte RAM and 256MByte OneNAND flash
o 512MByte RAM and 512MByte OneNAND flash
* On board microSD slot
* On board USB 2.0 OTG miniAB socket for power and data
* On board USb 2.0 Host interface
* Features
o I2C, PWM lines (6), A/D (6), 1-wire, UART, SPI, Camera in, Extra MMC lines.
o Headset, Microphone, backup battery
o USB OTG signals, USB HS Host
* Wireless
o Wifi 802.11 b/g
o Bluetooth 2.0
* Connections
o 2 x 70-pin PCB to PCB connector
o 2 x 27-pin flex ribbon connector
* Size: 18 x 68mm
IGEP MODULE will be offered in various configurations:
- OMAP3530 + wifi + bluetooth + 4GBit RAM + 4GBit ONENAND FLASH
* OMAP3530 + 4GBit RAM + 4GBit ONENAND FLASH
* OMAP3503 + wifi + bluetooth + 1GBit RAM + 2GBit ONENAND FLASH
* OMAP3503 + 1GBit RAM + 2GBit ONENAND FLASH
Prices and availability will be available soon.
Find preliminary specification here.
Please do not hesitate to contact ISEE Sales ( sales@iseebcn.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it ) for any question.