4,199
edits
Changes
m
→Power up Modem
<section begin=powerup />
*Power up the modem using the next commands:
'''IGEPv2 Expansion'''
<pre>echo 0 > /sys/class/gpio/gpio140/value
echo 1 > /sys/class/gpio/gpio141/value
sleep 1
echo 0 > /sys/class/gpio/gpio141/value</pre> *Once the modem is on (led near SIM card reader , is blinking now), you can interact with it via UART 2. '''IGEP BERLIN'''<pre>echo 0 > /sys/class/gpio/gpio145/valueecho 1 > /sys/class/gpio/gpio163/valuesleep 1echo 0 > /sys/class/gpio/gpio163/value</pre> *Once the modem is on (led near SIM card reader (IGEPv2 Expansion) or , is blinking now), you can interact with it via UART 2. You can use Microcom to comunicate with it from the serial debug console:
<pre>microcom -s 115200 /dev/ttyO1</pre>
*To check the modem status use the command:<br>