0
edits
Changes
no edit summary
= How to Prepare the IDC10 to DB9 Cable for use it with a USB232 Serial Conversor on IGEPv2-RC Series =
== Check your DB9-to-Flat Cable == * CAUTIONThe [https://www.isee.biz/store/product/67-igepv2-serial-debug-cable IDC10 to DB9 Cable] looks like a DB9-to-Flat spare Cable from a Personal PC but is different. If you have a DB9-to-Flat spare Cable from a Personal PC, you have to consider that it has pin-to pin connection and that this doesn't correspond to the IGEP (J960) serial connector.In this case you have to modify your DB9-to-Flat spare Cable in order to use only pins 2,3,5 pin DC9 - pin IGEP (J960) 2 - 2 3 - 3 5 - 5 == Necessary Material ==
#IDC10 to DB9 Cable.
#Cutter.
#Scissors.<br>#'''[https://www.isee.biz/support/downloads/item/igepv2-hardware-reference-manual-2 IGEPv2 Hardware Reference Manual]'''.
[[Image:DSC 0164.JPG]]
<br>
== Procedure ==
The first step it's to separate the wires 5 and 6 for it and you should start count from the read red mark (the red mark it's the first, wire = 1) you should count 5 wires the then you should do a cut between wires 5 and 6.
<br>
[[Image:DSC 0177.JPG]]
<br>
== Serial Port Setup ==
You can use minicom, putty or a lot of several programs for connect to the [[Using serial debug portto communicate|debug serial port]] . The right Serial Port Configuration it's == Cable Type ==If your terminal not prints out text check the pinouts of your serial cable. In most cases you need a[http: 115200 //logmett.com/index.php?/quick-tips/rs232- 8N1 without hardware or software flow controlcable-pinouts.html 'null modem cable']. [[Category:How to forge]][[Category:UART]]