0
edits
Changes
no edit summary
= How to Prepare the IDC10 to DB9 Cable for use it with a USB232 Serial Conversor on IGEPv2-RC Series =
pin DC9 - pin IGEP (J960)
2 - 2
3 - 3
5 - 5
== Necessary Material ==
#IDC10 to DB9 Cable.
#Cutter.
#Scissors.<br>
#'''[https://www.isee.biz/support/downloads/item/igepv2-hardware-reference-manual-2 IGEPv2 Hardware Reference Manual]'''.
<br>
The first step it's to separate the wires 5 and 6 for it you should start count from the red mark (the red mark it's the first, wire = 1) you should count 5 wires then you should do a cut between wires 5 and 6.
<br>
<br>
This is the result for the cut between wire 5 and 6.
[[Image:DSC 0169.JPG]]
<br>
Now you must cut the unnecessary wires (wires 6 to 10).
[[Image:DSC_0172DSC 0172.JPG]]<br>
<br>
And the final result.
[[Image:DSC 0176.JPG]]
<br>
<br>
[[Image:DSC 0177.JPG]]
== Serial Port Setup ==
You can use minicom, putty or several programs for connect to the [[Using serial debug port to communicate|debug serial port]] .
== Serial Port Setup Cable Type ==If your terminal not prints out text check the pinouts of your serial cable. In most cases you need a[http://logmett.com/index.php?/quick-tips/rs232-cable-pinouts.html 'null modem cable'].