0
edits
Changes
no edit summary
== Product Brief ==
[[File:Pro_wi-fi_bgn_bt_diag.jpg|center]] == Wi-Fi == Firmware : ti-connectivity (from [http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/ linux-firmware repository]) === wl12xx debug === Make sure that DYNAMIC DEBUG is enabled in your kernel configuration. CONFIG_DYNAMIC_DEBUG=y <pre>echo 8 > /proc/sys/kernel/printk echo 0x8800 > /sys/module/wlcore/parameters/debug_level echo -n 'module cfg80211 +p' > /sys/kernel/debug/dynamic_debug/controlecho -n 'module mac80211 +p' > /sys/kernel/debug/dynamic_debug/controlecho -n 'module wl12xx +p' > /sys/kernel/debug/dynamic_debug/control</pre> == Bluetooth == Firmware : TIInit_7.6.15.bts (from https://github.com/TI-ECS/bt-firmware) === Setup and scan for devices === echo 142 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio142/direction # Setting the operation mode BT_EN echo 0 > /sys/class/gpio/gpio142/value sleep 1 echo 1 > /sys/class/gpio/gpio142/value # Attach to ad-hoc.bluetooth device iw hciattach -s 115200 /dev wlan0 set type ibss/ttyO4 texas 3000000 # Setting wlan0 Setup interface and scan for devices hciconfig hci0 up. ip link set wlan0 uphciconfig hci0 piscan # Setting ESSID hcitool -i hci0 scan === Headset and frequency (2427MHz Alsa Devices === Scan for your device <pre>hcitool - channel 4)i hci0 scanScanning ... 00:0C:8A:39:F3:E5 Bose BT2 01.03.00</pre> Pair your headset with your device: iw dev wlan0 ibss join "MyAdbluez-simple-Hoc" 2427agent hci0 00:0C:8A:39:F3:E5 # Setting ip address ip addr add 192Add this to your /etc/asound.168conf file: <pre>pcm.6btheadset { type plug slave { pcm { type bluetooth device 00:0C:8A:39:F3:E5 profile "auto" } } hint { show on description "BT Headset" } }ctl.1btheadset { type bluetooth} </24 dev wlan0pre> Now play with aplay: aplay -D btheadset music.wav
== Links ==