Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

How to create a SD-card with the latest software image

1,303 bytes added, 16:24, 6 June 2013
no edit summary
There is no guarantee that this will work on other ones.}}
'''Create a MicroSD CardIGEP Firmware bootable SD-card''' <br> Start session in IGEP SDK Virtual Machine. The first thing you'll do is download the latest firwmare from [http://www.isee.biz/component/zoo/item/igep-firmware-yocto-1-2 ISEE site].
<section begin=IGEPv2 /><section begin=IGEP_COM_MODULE /><section begin=IGEP_COM_PROTON /br>
#Select Products -&gt; Processor Boards
For example, assuming the SD-card device takes '/dev/sdf' and you have an IGEPv2 board ('igep0020'), type<br>
<pre>./igep-media-create --mmc /dev/sdf --machine igep0020 --image demo-image-sato-igep00x0.tar.bz2</pre>
This For example, assuming the SD-card device takes '/dev/sdb' and you have an IGEP COM&nbsp;MODULE ('igep0030') and speed up flash write without verify, type<br> <pre>./igep-media-create --mmc /dev/sdb --machine igep0030 --image demo-image-sato-igep00x0.tar.bz2 --skip-nandtest</pre> These methods should give you a bootable SD-card. Finally plug the MicroSD card into IGEP Processor Board and power up your board.<br>  
<br>
'''Booting IGEP device and login/connect methods'''
 
Insert the bootable SD-card media into the micro-SD card socket of IGEP device and power on it. This should result in a running system with Sato graphical desktop root filesystem built by Yocto.
 
If you want login in/connect to the system, you have several options: <br>
 
*'''Serial debug link''', you should just plug serial cable to your computer<br>
*'''Ethernet''', you should assign an IP in the range 192.168.5.[2-254] and connect to target using a SSH client and connecting to 192.168.5.1&nbsp;<br>
*'''Wifi''', connect to IGEP_xx network, a dynamic IP should be assigned in your host and you can sign into the target connecting to 192.168.6.1 <br>
*'''USB ethernet gadget''', connect a IGEP device to USB port of your computer, dynamic IP should be assigned in your host and you can sign into the target connecting to 192.168.7.1 o (if available) Graphical interface on plugged DVI/TFT display and USB Keyboard in IGEP device
 
The root password is empty, so to log in type ''''root'''' for the user name and hit 'Enter' at the Password prompt: (''empty password'') and you should be in. <br>
'''Flash the latest software image'''Then, you could play and fun with IGEP&nbsp;board.
Optionally For example, you could flash the latest software image in into internal FLASH memory ( [http://labs.isee.biz/index.php/How_to_flash_the_latest_software_image read hereHow to flash the latest software image])
<br>
<section end=IGEPv2 /><section end=IGEP_COM_MODULE /><section end=IGEP_COM_PROTON /br>
[[Category:Software]] [[Category:Boot_loaders]] [[Category:Software_distributions]] [[Category:Linux_Kernel]]
0
edits
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/8705"