Changes

'''Create IGEP Firmware bootable SD-card''' <br>  '''IGEP AM335x''' - The first thing you'll do is download the latest firwmare from [http://www.isee.biz/support/downloads/item/igep-firmware-yocto-1-4-2-0-am335x ISEE site Yocto IGEP AM335x] <br>'''IGEP OMAP 3''' - Start session in IGEP&nbsp;SDK&nbsp;Virtual Machine. The first thing you'll do is download the latest firwmare from [http://www.isee.biz/ support/downloads/item/igep-firmware-yocto-1-2-2-6 ISEE siteYocto IGEP OMAP 3]<br>'''IGEP SMARC i.MX6 Dual/Quad''' - The first thing you'll do is download the latest firwmare from [http://downloads. isee.biz/pub/releases/firmware/igep_firmware-yocto-1.8-0-imx6q-igep0046.tar.bz2 ISEE site Yocto IGEP SMARC i.MX6 Dual/Quad] <br>'''IGEP SMARC i.MX6 DualLite''' - The first thing you'll do is download the latest firwmare from [http://downloads.isee.biz/pub/releases/firmware/igep_firmware-yocto-1.8-0-imx6dl-igep0046.tar.bz2 ISEE site Yocto IGEP SMARC i.MX6 DualLite] <br>'''IGEP SMARC i.MX6 Solo''' - The first thing you'll do is download the latest firwmare from [http://downloads.isee.biz/pub/releases/firmware/igep_firmware-yocto-1.8-0-imx6s-igep0046.tar.bz2 ISEE site Yocto IGEP SMARC i.MX6 Solo] <br> <br>

<pre>./igep-media-create -–mmc &lt;mmc&gt; --image &lt;image file&gt; --machine <machine></pre> where:<br>&lt;mmc&gt; - is the SD-Card device of your computer.<br>&lt;image file&gt; - is the file that contains bootloader, kernel and rootfs image.<br> '''Create a MicroSD Card''' &lt;machine&gt; - is the IGEP Processor Board. Available options are:

For example, assuming the SD-card device takes '/dev/sdf'and you have an IGEPv2 board ('Insert your MicroSD igep0020'), type<br> <pre>./igep-media-create --mmc /dev/sdf --machine igep0020 --image demo-image-sato-igep00x0.tar.bz2</pre> For example, assuming the SD-carddevice takes '/dev/sdb' and you have an IGEP COM&nbsp;MODULE ('igep0030' into the Linux host ), type<br> <pre>./igep-media-create --mmc /dev/sdb --machine (the machine where igep0030 --image demo-image-sato-igep00x0.tar.bz2</pre> These methods should give you have downloaded the firmware)a bootable SD-card. <br>

In your Terminal session, run the following '''system command''':   dmesg<br>

This instruction will prompt all the '''system traces'''. If your MicroSD card has actually been detected by the system, '''the last lines of that promptBooting IGEP device and login/connect methods''' will correspond to the MicroSD card detection and mounting.

Check Insert the '''MicroSD name and path''', for example: /dev/sdb bootable SD-card media into the micro-SD card socket of IGEP device and remember power on it. This should result in a running system with Sato graphical desktop root filesystem built by Yocto.

Now If you can '''run the following script''' want login in /connect to the directory you have just extractedsystem, and you will have to add some parameters. In your Terminal session, typeseveral options: <br>

*'''Serial debug link''', you should just plug serial cable to your computer<br> *'''Ethernet''', you should assign an IP in the range 192.168.5.[2-254] and connect to target using a SSH client and connecting to 192.168.5.1&nbsp;<br> *'''Wifi''', connect to IGEP_xx network, a dynamic IP should be assigned in your host and you can sign into the target connecting to 192.168.6.1 <br> *'''USB ethernet gadget''', connect a IGEP device to USB port of your computer, dynamic IP should be assigned in your host and you can sign into the target connecting to 192.168.7.1 o (if available) Graphical interface on plugged DVI/TFT display and USB Keyboard in IGEP device

The root password is empty, so to log in type ''''root'''' for the user name and hit 'Enter' at the Password prompt: (''empty password'') and you should be in./poky-media-create --mmc [device] --binary poky-image-sato-igep00x0-[timestamp].tar.gz --machine [machine]<br>

*'''For example, you could flash the latest software image into internal FLASH memory ( [device]''' is the SD card device name, for examplehttp: /dev/sdb *'''[timestamp]''' the parameter --binary is actually the name of another labs.tarisee.gz compressed file that you have already extracted in the previous stepsbiz/index. If you want php/How_to_flash_the_latest_software_image How to auto-complete flash the [timestamplatest software image] parameter, press TAB in the ''timestamp'' when writing the instruction and the system will write the name of the file automatically. *'''[machine]''' is the machine name, options are:)

<br> This instruction will last a few minutes. When the process ends, you will have a '''MicroSD card with the latest software''' on it.

Finally plug the MicroSD card into IGEP Processor Board and power up your board.  <br> {{Message/Forum}}