Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

How to create a SD-card with the latest software image

982 bytes added, 18:07, 7 December 2016
no edit summary
{{Message/Information Message|title=TITLE|message=This How-To was tested with an Ubuntu 10.04 host machineIGEP SDK Virtual Machine, but most of the contents are valid also for other GNU/Linux distributions.There is no guarantee that this will work on other distributionsones.}}
'''Create IGEP Firmware bootable SD-card''' <section begin=IGEPv2 /br><section begin=IGEP_COM_MODULE /><section begin=IGEP_COM_PROTON />Start session in a Linux PC. The first thing you'll do is download latest firwmare from the ISEE site.
Download it '''IGEP AM335x''' - The first thing you'll do is download the latest firwmare from [http://www.isee.biz/support/downloads/item/igep-firmware-yocto-1-4-2-0-am335x ISEE site Yocto IGEP AM335x] <br>'''IGEP OMAP 3''' - Start session in IGEP SDK Virtual Machine. The first thing you'll do is download the Software latest firwmare from [http:/ /www.isee.biz/support/downloads/item/igep-firmware-yocto-1-2-2-6 ISEE site Yocto IGEP Firmware section of your boardOMAP 3] <br>'''IGEP SMARC i.MX6 Dual/Quad''' - The first thing you'll do is download the latest firwmare from [http://downloads.isee.biz/pub/releases/firmware/igep_firmware-yocto-1.8-0-imx6q-igep0046.tar.bz2 ISEE site Yocto IGEP SMARC i.MX6 Dual/Quad] <br>'''IGEP SMARC i.MX6 DualLite''' - The first thing you'll do is download the latest firwmare from [http://downloads.isee.biz/pub/releases/firmware/igep_firmware-yocto-1.8-0-imx6dl-igep0046.tar.bz2 ISEE site Yocto IGEP SMARC i.MX6 DualLite] <br>'''IGEP SMARC i.MX6 Solo''' - The first thing you'll do is download the latest firwmare from [http://downloads.isee.biz/pub/releases/firmware/igep_firmware-yocto-1.8-0-imx6s-igep0046.tar.bz2 ISEE site Yocto IGEP SMARC i.MX6 Solo] <br>
<section begin=IGEPv2 /> http://www.isee.biz/products/processor-boards/igepv2-board for IGEPv2<section end=IGEPv2 /><section begin=IGEP_COM_MODULE /> http://www.isee.biz/products/processor-boards/igep-com-module for IGEP COM MODULE<section end=IGEP_COM_MODULE /><section begin=IGEP_COM_PROTON /> http://www.isee.biz/products/processor-boards/igep-com-proton for IGEP COM PROTON<section end=IGEP_COM_PROTON /br>
<section begin=IGEPv2 /><section begin=IGEP_COM_MODULE /><section begin=IGEP_COM_PROTON />#Select Products -&gt; Processor Boards Next, we will use the application 'tar' to untar (uncompress) the downloaded file#Click on your processor board product. #Click on Software tab #Click on IGEP Firmware #Select Download icon.
Open Once the file is downloaded you can create bootable SD-Card, under Linux, untar the IGEP <pre>tar jxf igep_firmware-yocto-*.tar.bz2cd igep_firmware-yocto-*</pre> Insert a Terminal session SD-Card media and go use the igep-media-create script to copy the folder firmware to SD-Card media. <pre>./igep-media-create -–mmc &lt;mmc&gt; --image &lt;image file&gt; --machine <machine></pre> where you have :<br>&lt;mmc&gt; - is the SD-Card device of your downloaded computer.<br>&lt;image file&gt; - is the filethat contains bootloader, kernel and rootfs image.<br>&lt;machine&gt; - is the IGEP Processor Board. Then typeAvailable options are:
tar xzf poky*igep0020 -firmwareFor IGEP v2 Processor Board *igep0030 -3.3.1For IGEP COM MODULE Processor Board *igep0032 -11.tar.gzFor IGEP COM PROTON Processor Board*igep0033 - For IGEP COM AQUILA Processor Board*igep0046 - For IGEP iMX6 Processor Board
Next, you can enter the extracted directory:
cd pokyFor example, assuming the SD-firmwarecard device takes '/dev/sdf' and you have an IGEPv2 board ('igep0020'), type<br> <pre>./igep-media-create -3-mmc /dev/sdf --machine igep0020 --image demo-image-sato-igep00x0.tar.3bz2</pre> For example, assuming the SD-card device takes '/dev/sdb' and you have an IGEP COM&nbsp;MODULE ('igep0030'), type<br> <pre>.1/igep-media-create --1mmc /dev/sdb --machine igep0030 --image demo-image-sato-igep00x0.tar.bz2</pre> These methods should give you a bootable SD-card. <br>
<br>
'''Create a MicroSD CardBooting IGEP device and login/connect methods'''
Now, lets create Insert the MicroSD bootable SD-card with media into the latest firmwaremicro-SD card socket of IGEP device and power on it. Before it, you have to know '''which 'device' is the MicroSD listed This should result in the /dev/ directory''', a directory where the detected devices are listed running system with Sato graphical desktop root filesystem built by the Linux systemYocto.
To '''know If you want login in/connect to the device name'''system, follow this instructionsyou have several options:<br>
*'''Insert Serial debug link''', you should just plug serial cable to your MicroSD cardcomputer<br> *'''Ethernet''', you should assign an IP in the range 192.168.5.[2-254] and connect to target using a SSH client and connecting to 192.168.5.1&nbsp;<br> *''' Wifi''', connect to IGEP_xx network, a dynamic IP should be assigned in your host and you can sign into the Linux target connecting to 192.168.6.1 <br> *'''USB ethernet gadget''', connect a IGEP device to USB port of your computer, dynamic IP should be assigned in your host machine (the machine where and you have downloaded can sign into the firmwaretarget connecting to 192.168.7.1 o (if available).Graphical interface on plugged DVI/TFT display and USB Keyboard in IGEP device
In your Terminal sessionThe root password is empty, run so to log in type ''''root'''' for the following user name and hit 'Enter'at the Password prompt: ('system command'empty password'':) and you should be in. <br>
dmesgThen, you could play and fun with IGEP&nbsp;board.
This instruction will prompt all For example, you could flash the '''system traces'''latest software image into internal FLASH memory ( [http://labs.isee.biz/index. If your MicroSD card has actually been detected by the system, '''the last lines of that prompt''' will correspond php/How_to_flash_the_latest_software_image How to flash the MicroSD card detection and mounting.latest software image] )
Check the '''MicroSD name and path''', for example: /dev/sdb and remember it.<br>
Now you can '''run the following script''' in the folder you have just extracted, and you will have to add some parameters. In your Terminal session, type:<br>
{{Message/Forum}}
./poky-media-create --mmc [device[Category:Software]] --binary poky-image-sato-igep00x0-[timestamp[Category:Boot_loaders]].tar.gz --machine [machine[Category:Software_distributionswhere:* '''[device]''' is the SD card device name, for example: /dev/sdb* '''[timestamp]''' the parameter --binary is actually the name of another .tar.gz compressed file that you have already extracted in the previous steps. If you want to auto-complete the [timestampCategory:Linux_Kernel] parameter, press TAB in the ''timestamp'' when writing the instruction and the system will write the name of the file automatically.* '''[machine]''' is the machine name, options are:<section begin=IGEPv2 />** igep0020 , for IGEPv2<section end=IGEPv2 /><section begin=IGEP_COM_MODULE />** igep0030 , for IGEP COM MODULE<section end=IGEP_COM_MODULE /><section begin=IGEP_COM_PROTON />** igep0032 , for IGEP COM PROTON<section end=IGEP_COM_PROTON /> <section begin=IGEPv2 /><section begin=IGEP_COM_MODULE /><section begin=IGEP_COM_PROTON />This instruction will last a few minutes. When the process ends, you will have a '''MicroSD card with the latest software''' on it. Finally plug the MicroSD card into IGEP Processor Board and power up your board. <section end=IGEPv2 /><section end=IGEP_COM_MODULE /><section end=IGEP_COM_PROTON />