1,381
edits
Changes
no edit summary
Copy the x-loader.bin.ift into the boot partition.
[[Image:Copy_XloaderCopy Xloader.png|thumb|center]]
Rename the x-loader.bin.ift to MLO<br>
[[Image:Rename_Xloader_to_MLORename Xloader to MLO.png|thumb|center]]Now we're ready for test the board boot from the microsd card.
=== X-Loader Boot ===
We will eject the boot and rootfs partitions from our Host PC, this step it's a lot important due the Linux must sync all changes before eject the microsd card.
We will insert our microSD card into the IGEP board, connect the serial debug cable and open the serial terminal
[[Image:Putty_Serial_ConfigurationPutty Serial Configuration.png|thumb|center]]Power UP the board.
== [[Image:IGEP_MicroSD_BootIGEP MicroSD Boot.png|thumb|center]]<br>Uboot<br> == Now it's time for copy and configure the uboot our next step it's copy the uboot in the microsd card (if you wish build uboot then you can follow this [[The_bootloader_U-Boot|howto]])
<br>
<br>