0
edits
Changes
→USB devices (keyboard and mouse)
You may now plug the Ethernet cable into the 10/100 Ethernet jack of the board to get network access. The default firmware configures the ethernet device with static ip address (192.168.5.1),
== Keyboard/Mouse == The USB Host of the board is ONLY USB High speed (480Mbit/s). You will need a powered USB HUB 2.0 to connect to most USB devices (. Now, plug your keyboard and mouse) ==into the hub. Remember to use the proper cable to connect the USB OTG port on the Overo expansion board to your hub. We recommended that you use a cable like the USB Mini-B to Mini-A Adapter. Though a common USB Standard-A to Mini-B type cable will fit, it will not work. OTG ports require a cable that grounds the ID pin in order to enable the port to act in host mode.
''' Basic '''