__TOC__
= Overview = This is the 1/3 chapter of the Getting Started with IGEPv2 Tutorial Guide. In this first chapter, we will learn : * Connect some preripherals, including monitor and USB peripherals.* Boot the board and touring the default firmware.* Connect remotely to the board via ethernet. Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks. '''A REMINDER TO UPDATE the PRE-INSTALLED SOFTWARE IMAGE to a CURRENT RELEASE''' We highly recommended that you update your software image to a recent release to ensure you have the latest features and bug fixes. Please see the article on [[IGEP_firmware_Yocto | IGEP YOCTO Firmware]] = Requirements =
In this tutorial we are going to use the following peripherals:
* IGEPv2 with its power supply
* Monitor compatible with DVI-D
* HDMI/DVI-D cable.* Network cable.* Powered USB HUB 2.0.
* USB keyboard and a mouse
* PC
= Getting started =The following video illustrates the getting started process. You will see how to connect some peripherals and power up the board.
<div style="text-align: center;">
{{#ev:youtube|jtHL6JVo7kA|500}}
</div>
==Monitor==
The board will connect to your DVI monitor via its HDMI connector. You can use a HDMI/DVI-D cable to connect the board to the monitor. Your monitor should be able to support 1024 x 768 @ 60 Hz, which is the default resolution used by the firmware.
== Monitor == The board will connect to your DVI monitor via its HDMI connector. You can use a HDMI/DVI-D cable to connect the board to the monitor. Your monitor should be able to support 1024 x 768 @ 60 Hz, wich is the default resolution used by the firmware. If your monitor doesn't have an a DVI-D input, you can also use a HDMI input using a HDMI/HDMI cable, in that case you should [[How_do_I_edit_my_kernel_command_line | edit the kernel cmdline parameters]] and replace :
omapfb.mode=dvi:1280x720MR-16@60
for this one:
omapfb.mode=dvi:hd720-16@60
== Ethernet Network cable == ''' Basic ''' Plug an '''You may now plug the Ethernet cable''' between IGEPv2 and your client machine (or any other network device with ethernet connectivity). ''' Know more ''' IGEPv2 comes with one into the 10/100BASE-TX 100 Ethernet ports. In jack of the following chapters we will use ethernet board to get network access IGEPv2. == USB devices (keyboard and mouse) == ''' Basic ''' Connect an USB hub to The default firmware configures the USB type-A connector Ethernet device with static ip address (USB Host) in IGEPv2192. Then plug an USB keyboard and USB mouse to the USB hub168. ''' Know more ''' Only USB 25.0 devices will work in IGEPv2, so if you connect any USB mouse 1.0 into the USB host connector without using an USB hub 2.0, it will not work. == Power up IGEPv2 (5V DC) == ''' Basic ''' Once you have connected the peripherals '''you can apply power''' to your IGEPv2 (5V DCC). ''' Know more ''' '' Led's sequence: '' When you power up your board, you will also see how two red LED's light up while the system boots (the sequence will be different based on software version). After a few seconds, there is a fixed green led on. '' Boot priority: '' IGEPv2 can boot from many other devices (listed by priority):
# from ==Keyboard/Mouse==The USB# from UART3# from Host of the board is ONLY USB High speed (480Mbit/s). You will need a MMC/MicroSD card # from OneNAND memorypowered USB hub 2.0 to connect to most USB devices.
As we haven't set any other boot device rather than Now, connect an USB hub to the oneNAND (USB Host and plug your keyboard and mouse into the IGEPv2 flash memory) the system boots from ithub.
But, for example, if as '''the MicroSD card has an upper priority than ==Booting==With all the flash'''peripherals attached, if you plug a MicroSD card into IGEPv2 in the wall adapter (with the right configuration 5V DC) and power on it)your board. You will see a few lights flash, it see how to red leds light up and after a few seconds may light up only a fixed green led. The sequence will boot from the MicroSD cardbe different based on software version.
== Test "Under the Demo software distribution ==hood" the bootloader is preparing to load the linux kernel. The linux kernel loads and initializes the hardware and mounts the root file system. Finally, you will see a screen desktop like the following screenshot.
''' Basic '''The pre-installed firmware in its flash memory consists of a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.
When IGEPv2 powers up, You can use the desktop of mouse and the preinstalled software will appear on keyboard to dive into the screendesktop.
You can use [[Image:Poky-screenshot.png|thumb|center|500px|Screenshot of the mouse and Desktop of the keyboard to test the demo applications.pre-installed software]]
==Remote connection via Ethernet=={{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [[Imagehttp:Poky-screenshot//labs.png|thumb|500px|center|Screenshot of the Desktop of isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the pre-installed software]]board}}
In your Host Machine, open a terminal sessions set up an Ethernet alias for your network interface,
''' Know more ''' $ sudo ifconfig eth0:0 192.168.5.10
All IGEP Processor Boards, including IGEPv2, have a pre-installed software in its flash memory which consists of a '''minimal Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with '''Poky Platform Builder'''.Connect to the board using the SSH protocol
== Log into IGEPv2 via Ethernet interface =={{Message/Information Message|title=|message=In non-Linux operating system, use [http://labs $ ssh root@192.isee168.biz/index5.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to IGEP COM MODULE via USB or read article [http://labs.isee.biz/index.php/Using_USB_ethernet_gadget_to_communicate "Using USB ethernet gadget to communicate"]}}1
In your Host Machine: Open a Terminal session and set the IP of the Ethernet interface in which IGEP is connected (An empty password for example eth0): *In the file /etc/network/interfaces, you root user should add:<pre>iface eth0 inet dhcp iface eth0:0 inet staticaddress 192.168.5.10netmask 255.255.255.0</pre> *Type in a terminal:<pre>sudo ifup eth0:0</pre> *Revise that:<pre>jdoe@ubuntu ~ $ ifconfig...eth0:0 Link encap:Ethernet HWaddr 08:00:27:ad:0c:ad inet addr:192.168.5.10 Bcast:0.0.0.0 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1...</pre>*Connect work to access to IGEP device jdoe@ubuntu ~ $ ssh root@192.168.5the shell prompt.1
{{Navigation/IGEP Technology Guides/Getting Started/Ending
|Next_Step={{#lst:Template:Links|IGEPv2_Community_Guides_2}}
}}
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEPv2_Tech_Family}}
|Tech_ID={{#lst:Template:Links|IGEPv2_Tech_ID}}
|Name={{#lst:Template:Links|IGEPv2_Name}}
|Image={{#lst:Template:Links|IGEPv2_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEPv2_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEPv2_ISEE_Hardware}}
}}
[[Category:IGEP Technology Devices Guides]]