Changes

Getting started with IGEP SMARC iMX6

1 byte added, 11:45, 11 May 2016

no edit summary

~~== Booting ==~~

~~With all the peripherals attached, plug in the wall adapter (5V DC) and power on your board. You will see a few lights flash.~~

== Serial debug connection ==

A detailed guide on how to connect via serial debug port can be found by following this link: [[Using serial debug port to communicate]]

== Booting ==

With all the peripherals attached, plug in the wall adapter (5V DC) and power on your board. You will see a few lights flash.

0

edits