34
edits
Changes
no edit summary
'''3. Booting'''
You can test your new microSD card with a Serial client such as PuTTy. [[Http://labs.isee.biz/index.php/Using serial debug port to communicate|Here]] is an explanation about how to configure it.
(Note that speed should be configured to 115200 bauds).
If you already have configured it or you are using another Serial client and you have connected the Serial cable to the IGEP004 IGEP0034 board, then you are ready to test your microSD.
Insert the microSD in your IGEP0034 board and power up the board.