Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Getting started with IGEP SMARC PXA2128

69 bytes removed, 12:42, 5 September 2018
no edit summary
$ wget http://downloads.isee.biz/pub/relaunch/rootfs/ubuntu/xenial/ubuntu-xenial-armhf-igep-base-no-version.tgz
 
Once we have downloaded the software, i'ts necessary compile linux kernel and install the modules in your Rootfs, the tutorial is in the following link:
 
[[Linux Kernel 4.9.y]]
 
'''2. Burn Software  in SD Card'''
To boot from MicroSD Card follow this [[How to boot from MicroSD Card|link.]]
 
 
I'ts necessary compile linux kernel and install the modules in your Rootfs, the tutorial is in the following link:
 
[[Linux Kernel 4.9.y]]
'''3. Booting'''
You can test your new microSD card with a Serial client such as PuTTy. [[Http://labs.isee.biz/index.php/Using serial debug port to communicate|Here]] is an explanation about how to configure it.
(Note that speed should be configured to 115200 bauds).
If you already have configured it or you are using another Serial client and you have connected the Serial cable to the IGEP004 IGEP0034 board, then you are ready to test your microSD.
Insert the microSD in your IGEP0034 board and power up the board.
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/11938...11941"