49
edits
Changes
From IGEP - ISEE Wiki
no edit summary
This is the 1/3 chapter of the Getting Started with IGEP AQUILA EXPANSION Tutorial Guide. In this first chapter, we will learn :
* Boot the board and touring the default firmware.
* Connect remotely to the board via Serial interface.
* Network cable
* PC
== Connect IGEP SMARC Expansion with IGEP SMARC Boards ==
The IGEP SMARC Expansion connects to the IGEP SMARC Boards through J200 connector. <br> <br>
{| cellspacing="1" cellpadding="1" width="200" border="1" align="center"
|-
| [[Image:SMARC_CON_BASE0040.jpg|600px]]
|}
== Booting ==
Other boot possibilities can be selected (see SMARC EXPANSION manual)
"Under the hood" the bootloader is preparing to load the linux kernel. The linux kernel loads and initializes the hardware and mounts the root file system. Finally, you will see a screen desktop like the following screenshot.
The firmware in its microSD card consists of a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.
| [[Image:BOOT_SEL_BASE0040.jpg|600px]]
|}
== Network ==
