0
edits
Changes
From IGEP - ISEE Wiki
m
Put To connect to the radar , open a new browser window and type any of these URL addresses: * http://radar (Windows)* http://radar.local (Linux or Mac) or directly to any of these IP addresses (remember to setup your network adapter in your computer to the same network subnet):* http://192.168.2.189 on the web browser232* http://192.168.5. 1 If the radar has already started you will see the Home page of the web radar application demo, if not, please be patient and wait a little bit more until the radar starts. You will see a home page similar to this one:
→Connect to Radar IP
=== Network & Connectivity ===
You IGEP RADAR solution has some default network configurations, based on the [[IGEP_firmware_Yocto#Other_useful_information|IGEP Firmware Yocto]] configuration:
{| cellspacing="0" cellpadding="5" border="0" align="center" width="60%" style="text-align: center;"
=== Wait few minutes ===
Once you apply power, please wait a few minutes while IGEPv2 board boots with the default firmware flashed on the internal memory. You will see LEDs from IGPv2 board IGEPv2 blinking until system has booted, then you will see a fixed lighted green LED.
=== Run Web Browser on PC ===
=== Connect to Radar IP ===
[[Image:WEB HOME PAGE NEWs.jpg]]<br>
