|ISEE_MainPage={{#lst:Template:Links|IGEP_PARIS_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEP_PARIS_ISEE_Hardware}}
}}
<br> __TOC__
= Overview =This is the 1/3 chapter of IGEP PARIS Expansion Tutorial Guide.
In this first chapter, we will learn how to connect some expansion peripherals.
= Requirements =
In these tutorials we are going to need the following components:
*[http://isee.biz/products/processor-boards/igep-com-module IGEP COM MODULE].
*5V DC power supply with a minimum of 3A current capacity.
*[http://shop.isee.biz/buy-online/accesories/tft-24-bits-seiko-7.html Seiko 7"] screen if you need a touch screen.
*Ethernet cable for network communications.
*An USB keyboard and a mouse (optional).
*Li-on battery with 3V3 (optional).
*A PC.
= Getting started =
== TFT and Touchscreen ==
[[Image:berlin_paris_screen_connectors.JPG|right|200px]] IGEP PARIS Expansion supports SEIKO 7” LCD screen. Use J200, J203 and J204 connectors to attach screen. See image for more details.<br>
'''Know more'''<br>
IGEP PARIS Expansion integrates LCD backlight driver (TPS61081) and touch screen controller (TSC2046), a 4-wire touch screen controller which supports a low voltage I/O interface from 1.5V to 5.25V.<br><br><br><br>
== Serial port =='''Basic''' [[Image:Paris db9.jpg|right|200px]] __TOC__
IGEP PARIS Expansion integrates a DB9 RS232 connector.<br>
'''Know more'''
This peripheral (UART 3) can be used =Requirements=In this tutorial we are going to debug system using kernel traces, getting a remote prompt, etc. <br> <br> <br>use the following peripherals:
== Ethernet * IGEP COM MODULE* IGEP PARIS Expansion* 5V DC power supply with a minimum of 3A current capacity* TFT touch screen Seiko 7"* Network cable ==''' Basic ''' [[Image:Paris ethernet.jpg|right|200px]] * USB keyboard and a mouse (optional)* Li-on battery with 3V3 (optional)* DB9 connector* PC
Plug an '''Ethernet cable''' between =Getting started=<div style="text-align: center;">{{#ev:youtube|bZ5WSB_n_To|500}}</div>==Connect IGEP PARIS Expansion with IGEP COM MODULE/NEUTRON Board==[[Image:PARIS+module.JPG|right|200px]]The IGEP PARIS Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and your client machine (or any other network device with Ethernet connectivity)J4 connectors.Just take a look on the figure to mount it:<br /> <br /><br /><br /><br /><br /><br />
==Enable IGEP PARIS Expansion support==
IGEP Yocto Firmware comes with IGEP PARIS Expansion support. However open igep.ini, you can do this [[How_do_I_edit_my_kernel_command_line | checking following kernel cmdline parameter]]:
''' Know more '''<pre>buddy=base0010 buddy.revision=B;buddy=ilms0015</pre>
IGEP PARIS comes with one 10==Remote connection via Ethernet=={{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [http://labs.isee.biz/100BASE-TX Ethernet portindex. php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the board}}
In the following chapters we will use your Host Machine, open a terminal sessions set up an Ethernet to access IGEP PARIS.alias for your network interface,
== USB devices ==''' Basic ''' [[Image $ sudo ifconfig eth0:Paris usb0 192.jpg|right|200px]] 168.5.10
Connect an USB hub to the USB type-A connector (USB Host) in IGEP PARIS.board using the SSH protocol
Then plug an USB keyboard and USB mouse to the USB hub $ ssh root@192. 168.5.1
''' Know more ''' Only USB 2.0 devices will An empty password for root user should work in IGEP PARIS, so if you connect any USB mouse 1.0 into the USB host connector without using an USB hub 2.0, it will not work. == Battery ==[[Image:Paris battery.jpg|right|200px]] J102 is a 2.5mm pitch, can be used to connect a 3,7V Battery to power the base board.<br><br><br><br><br><br> == Connect IGEP PARIS Expansion with IGEP COM MODULE/NEUTRON Board ==[[Image:PARIS+module.JPG|right|200px]]The IGEP PARIS Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure to mount it:<br> <br><br><br><br><br><br> == Power up IGEP PARIS Expansion ==[[Image:Paris berlin connector.png|right|200px]]Once you have connected the peripherals '''you can apply power''' to your IGEP PARIS with 5V DC power supply (J101) with a minimum of 3A current capacity.<br><br><br><br><br><br><br><br> == Test Demo software distribution with touch screen== ''' Basic ''' When IGEP PARIS powers up, the desktop of the preinstalled software will appear on the touch screen. You can use your fingers or a mouse and a keyboard to test the demo applications. [[Image:Poky-screenshot.png|thumb|500px|center|Screenshot of the Desktop of the pre-installed software]] ''' Know more ''' All IGEP Processor Boards have a pre-installed software in its flash memory which consists of a '''minimal Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with '''Poky Platform Builder'''. == Log into IGEP PARIS Expansion via Ethernet interface == {{Message/Information Message|title=|message=In non-Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect access to IGEP COM MODULE via USB or read article [http://labs.isee.biz/index.php/Using_USB_ethernet_gadget_to_communicate "Using USB ethernet gadget to communicate"]}} In your Host Machine: Open a Terminal session and set the IP of the Ethernet interface in which IGEP is connected (for example eth0): *In the file /etc/network/interfaces, you should add:<pre>iface eth0 inet dhcp iface eth0:0 inet staticaddress 192.168.5.10netmask 255.255.255.0</pre> *Type in a terminal:<pre>sudo ifup eth0:0</pre> *Revise that:<pre>jdoe@ubuntu ~ $ ifconfig...eth0:0 Link encap:Ethernet HWaddr 08:00:27:ad:0c:ad inet addr:192.168.5.10 Bcast:0.0.0.0 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1...</pre>*Connect to IGEP device jdoe@ubuntu ~ $ ssh root@192.168.5shell prompt.1
{{Navigation/IGEP Technology Guides/Getting Started/Ending
|Next_Step={{#lst:Template:Links|IGEP_PARIS_Community_Guides_2}}
}}
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEP_PARIS_Tech_Family}}
|Tech_ID={{#lst:Template:Links|IGEP_PARIS_Tech_ID}}
|Name={{#lst:Template:Links|IGEP_PARIS_Name}}
|Image={{#lst:Template:Links|IGEP_PARIS_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEP_PARIS_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEP_PARIS_ISEE_Hardware}}
}}
[[Category:IGEP Technology Devices Guides]]
