Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Getting started with IGEP NEW YORK

1,087 bytes removed, 10:50, 10 April 2018
no edit summary
 = Overview =This is the 1/3 chapter of IGEP NEW YORK Expansion Tutorial Guide.
In this first chapter, we will learn how to connect some expansion peripherals.
= Requirements =
=Requirements=
In this tutorial we are going to use the following peripherals:
* PC
= Getting started = 
<div style="text-align: center;">
{{#ev:youtube|QJjbcWNyPN4|500}}
</div>
==Connect IGEP NEW YORK Expansion with IGEP COM MODULE/NEUTRON Board==
[[Image:NY+module.JPG|right|200px]]The IGEP NEW YORK Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br /> <br /><br /><br /><br /><br /><br />
== Connect IGEP NEW YORK Expansion with IGEP COM MODULE/NEUTRON PROTON Board ==[[Image:NY+moduleproton.JPG|right|200px]]The IGEP NEW YORK Expansion connects to the IGEP COM MODULE/NEUTRON PROTON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br/> <br/><br/><br/><br/><br/><br/>
== Connect Enable IGEP NEW YORK Expansion with IGEP COM PROTON Board support==IGEP Yocto Firmware doesn't come with IGEP BERLIN Expansion support. Edit igep.ini file to configure it, you can do this [[Image:NY+proton.JPG|rightHow_do_I_edit_my_kernel_command_line |200pxadding following kernel cmdline parameter]]The IGEP NEW YORK Expansion connects to the IGEP COM PROTON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br> <br><br><br><br><br><br>
== Enable IGEP NEW YORK Expansion support ==
 
IGEP Yocto Firmware doesn't come with IGEP BERLIN Expansion support. Edit igep.ini file to configure it, you can do this [[How_do_I_edit_my_kernel_command_line | adding following kernel cmdline parameter]]
<pre>;buddy = base0010 buddy.revision=B
buddy=ilms0015</pre>
== How to identify New York revisions == IGEP New York has two different revisions: ILMS0015-RA1 and ILMS0015-RA2. It is important to know which revision you possess, because RA2 can be powered at 5Vdc, while RA1 doesn't (as it was designed to be powered by connecting it to an ILMS0010), so it can be harmful for the board.You can identify RA1 because it has two connectors on each side of the board, while RA2 has only two connectors on one side (it has the pads on the other side, but they aren't populated). == How to upgrade ILMS0015-RA1 to ILMS0015-RA2 =={{Message/Warning Message|title=Disclaimer|message=Modifying your board automatically removes any kind of guaranty. Do it at your own risk.}} To upgrade your IGEP New York to revision RA2, in order to power your board through the accessible pins, you must solder a 4.7Vdc zener diode between TP1 and ground (nearest ground is the one from MOSFET Q1's drain) to act as a linear voltage regulator. The way to do it is by soldering the zener's cathode (marked with a strip) to TP1 and the diode's anode to ground (Q1's drain pad). == Remote connection via USB Ethernet Gadget == 
{{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the board}}
560
edits