43
edits
Changes
From IGEP - ISEE Wiki
→Introduction
This page describes how to use the USB device port of our [http://www.igep.es/index.php?option=com_content&view=article&id=109&Itemid=123 ISEE IGEP MODULE] with OMAP3 processor to communicate with USB port of your computer (or USB hub connected to your computer).
We directly could can power up the IGEP MODULE via the on-board USB OTG port, and we only need use a USB cable (USB A type plug to mini B type plug).
The on-board HS USB OTG port is used as the default power input for IGEP MODULE standalone operating mode.
Once the board is power powered up and running, we will get Ethernet connectivity over the same USB cable (USB Ethernet Gadget/RNDIS driver).
By default, the IGEP MODULE interface will have the IP address 192.168.7.2.
