0
edits
Changes
m
address 192.168.7.1 network 192.168.7.0 netmask 255.255.255.0 broadcast 192.168.7.255 gateway 192.168.7.1
no edit summary
This page describes how to use the USB device port of our [http://www.igep.es/index.php?option=com_content&view=article&id=109&Itemid=123 ISEE IGEP MODULE] with OMAP3 processor to communicate with the USB port of your computer (or USB hub connected to your computer).
[[Image:IGEP_module_01.jpg|center|589x201px]]
We can power up the IGEP MODULE via the on-board USB OTG port, and we only need to use a USB cable (USB A type plug to mini B type plug).
auto usb0
iface usb0 inet static
Connect to the board using ssh
2. The following driver INF file from the Gumstix Project works under Windows XP. [http://www.davehylands.com/linux/gumstix/usbnet/linux.inf <span class="s1">http://www.davehylands.com/linux/gumstix/usbnet/linux.inf</span>]
3. In ''Control Panel/Network Connections'' and after driver installation set up the TCP/IP properties of the ''Local Network Connection'' (''Linux USB Ethernet/RNDIS Gadget'') as follow:<br>
<pre>IP address 192.168.7.1
Netmask 255.255.255.0
Gateway 192.168.7.1 </pre><span class="s2">4. Use putty ([http://www.chiark.greenend.org.uk/~sgtatham/putty/ <span class="s3">http://www.chiark.greenend.org.uk/~sgtatham/putty/</span>]) to connect via SSH (192.168.7.2)</span><br>
'''''Thanks to Iñigo Lazkanotegi from Tecnalia (Donostia - San Sebastián) for this contribution.'''''
=== Mac OS X Host USB Network Configuration ===