4,199
edits
Changes
m
__TOC__= Overview = This is the 1/3 chapter of the Getting Started with IGEP COM PROTON Tutorial Guide. In this first chapter, we will learn how to connect and log into. Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks. We HIGHLY RECOMMEND THAT YOU UPDATE YOUR FIRMWARE IMAGE TO A RECENT RELEASE to ensure you have the latest features and bug fixes. Please see the article on [[IGEP_firmware_Yocto | IGEP YOCTO Firmware]]
= Overview =
This is the 1/3 chapter of IGEP COM PROTON Tutorial Guide.__TOC__
In this first chapter, we will learn '''how to connect IGEP COM PROTON''' and '''how to log into IGEP COM PROTON via USB'''.
== Power up IGEP COM PROTON ==
== Log into IGEP COM PROTON via USB Ethernet Gadget interface ==
{{Message/Information Message|title=|message=In non-Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to IGEP COM PROTON via USB}}
{{#lst:Using USB ethernet gadget to communicate|USB_linux}}
}}
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEP_COM_PROTON_Tech_Family}}
|Tech_ID={{#lst:Template:Links|IGEP_COM_PROTON_Tech_ID}}
|Name={{#lst:Template:Links|IGEP_COM_PROTON_Name}}
|Image={{#lst:Template:Links|IGEP_COM_PROTON_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEP_COM_PROTON_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEP_COM_PROTON_ISEE_Hardware}}
Undo revision 9376 by Pau pajuelo (Talk)
= Requirements =
* IGEP COM PROTON
* An USB Cable miniStandard-A to Mini-Btype cable* Powered USB Hub with external power supplyHUB 2.0
* A PC
= Getting started =
== Power up == The board can be powered though USB OTG connector. It's recommended use an external USB hub. Connect the USB Standard-A to Mini-B type cable between the board and the USB hub. [[Image:IGEP_COM_PROTON_with_HUB.JPG|rightcenter|200px]]IGEP COM PROTON for standalone operation (without expansion boards) can == Booting == With the board powered, you'll see a few lights flash, after a few seconds may light up a fixed green led. The sequence will be different based on softwre version. "Under the hood" the bootloader is preparing to load the linux kernel. The linux kernel loads and initializes the hardware and mounts the root file system. Finally, you'll be supplied able access to the board using the USB Ethernet Gadget. == Remote connection via USB Ethernet Gadget == {{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the board}} In your Host Machine, open a 5V DC through USB 2terminal session and connect to the boad using the SSH protocol, $ ssh root@192.168.7.0 OTG connector1 An empty password for root user should work to access to the shell prompt. Use an If you're experiencing some problems connecting to the board try with following guide : [[Using USB Hub with external power supply.<br><br><br><br><br><br><br><br>ethernet gadget to communicate]]
{{Navigation/IGEP Technology Guides/Getting Started/Ending
|Next_Step={{#lst:Template:Links|IGEP_COM_PROTON_Community_Guides_2}}
}}
[[Category:IGEP Technology Devices Guides]]