0
edits
Changes
no edit summary
| bgcolor="#cccccc" colspan="3" | '''Overview'''
|-
| [[Image:Igep0032 side.png{{#lst:Template:Links|IGEP_COM_PROTON_Image}}|250px|center|link=Category{{#lst:IGEP0032Template:Links|IGEP_COM_PROTON_Community_MainPage}}]]
|-
|1) '''Connect USB OTG cable to a PC'''
|-
|2) '''Log into IGEP0030 IGEP COM PROTON via USB Ethernet Gadget'''
|}
This first chapter describes '''how to boot IGEP032IGEP COM PROTON''' and also gives some '''basic instructions''' about how to connect some peripherals.
| bgcolor="#cccccc" |'''Power up via USB OTG connector'''
|-
|'''Connect IGEP0032 IGEP COM PROTON to a computer via USB OTG'''
|-
|}
The on-board '''HS USB OTG port''' is used as the default '''power input for IGEP0032 IGEP COM PROTON standalone''' operating mode.
First of all, connect IGEP0032 IGEP COM PROTON to your machine via the on-board USB OTG port with '''a USB cable''' (USB A type plug to mini B type plug).
Connect IGEP0032 IGEP COM PROTON to your machine. It will power up.
=== Connect to IGEP0032 IGEP COM PROTON via USB OTG connector ===
----
|}
You can log into IGEP0032 IGEP COM PROTON via many '''interfaces with network connectivity''', such usb-ethernet gadget.. and many others (when connected to an IGEP Expansion Board).
In this section of this tutorial we are going to '''connect via USB Ethernet gadget'''. This feature allows you to have an IP connection over USB.
You can use this feature to interact with the IGEP Processor operating system [host] by typing commands in a client machine (your PC, for example) to perform specific tasks in IGEP0032IGEP COM PROTON. You can communicate and open a debug session via many other interfaces such Serial port, Ethernet, Wifi, USB Ethernet Gadget, etc. (if available in an IGEP Expansion Board, for example).
Therefore, you will be able to access IGEP0032 IGEP COM PROTON from your client device (for example, a PC with Linux, Windows, etc.)
You can download it from its official page at: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Then, run the '''SSH client''' and start a SSH session to connect to the host (IGEP0032IGEP COM PROTON) from the client (your PC):
[[Image:Putty ssh.png|center]]
If everything goes right, you will be able to access to IGEP COM PROTON console from your PC via USB Ethernet gadget.
{{Navigation/IGEP Technology Devices Guides/Next Step
|Name={{#lst:Template:Links|IGEP_COM_PROTON_Name}}
|Community_MainPage={{#lst:Template:Links|IGEP_COM_PROTON_Community_MainPage}}
|Next_Step={{#lst:Template:Links|IGEP_COM_PROTON_Community_Guides_2}}
}}
[[Category:IGEP Technology Devices Guides]]
[[Category:Work in progress]]