4,199
edits
Changes
From IGEP - ISEE Wiki
m
Undo revision 9376 by Pau pajuelo (Talk)
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEP_COM_PROTON_Tech_Family}}
|Tech_ID={{#lst:Template:Links|IGEP_COM_PROTON_Tech_ID}}
|Name={{#lst:Template:Links|IGEP_COM_PROTON_Name}}
|Image={{#lst:Template:Links|IGEP_COM_PROTON_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEP_COM_PROTON_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEP_COM_PROTON_ISEE_Hardware}}
}}
= Overview =
This is the 1/3 chapter of the Getting Started with IGEP COM PROTON Tutorial Guide.
In this first chapter, we will learn how to connect and log into.
Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks.
We HIGHLY RECOMMEND THAT YOU UPDATE YOUR FIRMWARE IMAGE TO A RECENT RELEASE to ensure you have the latest features and bug fixes. Please see the article on [[IGEP_firmware_Yocto | IGEP YOCTO Firmware]]
__TOC__
= Requirements =
In this tutorial we are going to use the following peripherals:
* IGEP COM PROTON
* USB Standard-A to Mini-B type cable
* Powered USB HUB 2.0
* A PC
= Getting started =
== Power up ==
The board can be powered though USB OTG connector. It's recommended use an external USB hub. Connect the USB Standard-A to Mini-B type cable between the board and the USB hub.
[[Image:IGEP_COM_PROTON_with_HUB.JPG|center|200px]]
== Booting ==
With the board powered, you'll see a few lights flash, after a few seconds may light up a fixed green led. The sequence will be different based on softwre version.
"Under the hood" the bootloader is preparing to load the linux kernel. The linux kernel loads and initializes the hardware and mounts the root file system. Finally, you'll be able access to the board using the USB Ethernet Gadget.
== Remote connection via USB Ethernet Gadget ==
{{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the board}}
In your Host Machine, open a terminal session and connect to the boad using the SSH protocol,
$ ssh root@192.168.7.1
An empty password for root user should work to access to the shell prompt.
If you're experiencing some problems connecting to the board try with following guide : [[Using USB ethernet gadget to communicate]]
{{Navigation/IGEP Technology Guides/Getting Started/Ending
|Next_Step={{#lst:Template:Links|IGEP_COM_PROTON_Community_Guides_2}}
}}
[[Category:IGEP Technology Devices Guides]]
