Getting started with IGEP COM MODULE

From IGEP - ISEE Wiki

Revision as of 09:16, 31 August 2012 by Albert (talk | contribs) (removed duplicated title)

Jump to: navigation, search


Overview

This is the 1/3 chapter of IGEP COM MODULE Tutorial Guide.

In this first chapter, we will learn how to connect and log into.

Requirements

In this tutorial we are going to use the following peripherals:

  • IGEP COM MODULE
  • An USB Cable mini-B
  • USB Hub with external power supply
  • A PC

Getting started

Power up IGEP COM MODULE

IGEP COM MODULE with HUB.JPG
IGEP COM MODULE for standalone operation (without expansion boards) can be supplied using a 5V DC through USB 2.0 OTG connector. Use an USB Hub with external power supply.








Log into IGEP COM MODULE via USB Ethernet Gadget interface

Information.jpg In non-Linux operating system, use IGEP SDK Virtual Machine to connect to IGEP COM MODULE via USB

(from Using USB ethernet gadget to communicate)

In your Host Machine:

  • In the file /etc/network/interfaces, you should add:
iface usb0 inet dhcp
  • Plug an USB Type-A to USB Type-A mini cable between your host PC and the USB OTG from IGEP device. Use a powered USB Hub if you use IGEP COM MODULE or PROTON Board.
  • If you use IGEP SDK VM you need to attach the removable device RNDIS driver.
  • Type in a terminal:
sudo ifup usb0
  • Revise that:
jdoe@ubuntu ~ $ ifconfig
...
usb0      Link encap:Ethernet  HWaddr 66:cc:f2:be:51:b6  
          inet addr:192.168.7.10  Bcast:192.168.7.255  Mask:255.255.255.0
          inet6 addr: fe80::64cc:f2ff:febe:51b6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:2496 (2.4 KB)  TX bytes:8794 (8.7 KB)
...
  • Connect to IGEP device
jdoe@ubuntu ~ $ ssh root@192.168.7.1
The authenticity of host '192.168.7.1 (192.168.7.1)' can't be established.
ECDSA key fingerprint is 80:be:2d:b6:fe:b1:09:c3:3b:ac:0f:1d:f2:43:f2:20.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.7.1' (ECDSA) to the list of known hosts.
root@igep00x0:~# uname -a
Linux igep00x0 2.6.37 #1 Thu Jul 19 09:07:47 CEST 2012 armv7l GNU/Linux
root@igep00x0:~# 


You have successfully completed this chapter of the guide.


Igep forum.png If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat Irc.png