}}
__TOC__
=Overview=
This is the 1/3 chapter of the Getting Started with IGEP COM MODULE Tutorial Guide. In this first chapter, we will learn :
* Boot the board and touring the default firmware.
* Connect and log into.
__TOC__Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks. We HIGHLY RECOMMEND THAT YOU UPDATE YOUR FIRMWARE IMAGE TO A RECENT RELEASE to ensure you have the latest features and bug fixes. Please see the article on [[IGEP_firmware_Yocto | IGEP YOCTO Firmware]].
= Overview =
This is the 1/3 chapter of IGEP COM MODULE Tutorial Guide.
In this first chapter, we will learn how to connect and log into.
= Requirements =
=Requirements=
In this tutorial we are going to use the following peripherals:
* IGEP COM MODULE
* An USB Cable miniStandard-A to Mini-Btype cable* Powered USB Hub with external power supplyHUB 2.0* A PC
= Getting started =<div style== Power up IGEP COM MODULE =="text-align: center;">{{#ev:youtube|mXwt-2E4USE|500}}</div>
[[Image:IGEP_COM_MODULE_with_HUB.JPG|right|200px]]IGEP COM MODULE for standalone operation (without expansion boards) can be supplied using a 5V DC through USB 2.0 OTG connector. Use an USB Hub with external power supply.
==Power up==The board can be powered though USB OTG connector. It'' Boot priority: ''s recomended use an external USB hub. Connect the USB Standard-A to Mini-B type cable between the board and the USB hub.
IGEP COM MODULE can boot from many other devices (listed by priority)[[Image: IGEP_COM_MODULE_with_HUB.JPG|center|200px]]
# from {{Message/Information Message|title=USB OTG power is not available on newer IGEP COM MODULE devices|message='''NOTE''': Newer IGEP COM MODULE devices (IGEP0030-RFxx version since 2016 year) don't allow power devices using USB OTG connector. You should be used an expansion)# from UART3 board (using expansionas example [[IGEP_NEW_YORK|IGEP NEW YORK]])# from a MMC/MicroSD card # from OneNAND memory}}
As we haven==Booting==With the board powered, you't set any other boot device rather than the oneNAND (the IGEP COM MODULE ll see a few lights flash memory) the system boots from it, after a few seconds may light up a fixed green led. The sequence will be different based on software version.
But, for example, if as '''the MicroSD card has an upper priority than the flash''', if you plug a MicroSD card into IGEP COM MODULE (with the right configuration on it), it will boot from the MicroSD card.
"Under the hood" the bootloader is preparing to load the linux kernel. The linux kernel loads and initializes the hardware and mounts the root file system. Finally, you'll be able access to the board using the USB Ethernet Gadget. == Log into IGEP COM MODULE Remote connection via USB Ethernet Gadget interface =={{Message/Information Message|title=|message=In non-If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to IGEP COM MODULE via USBthe board.}} In your Host Machine, open a terminal session and connect to the board using the SSH protocol: $ ssh root@192.168.7.1 An empty password for root user should work to access to the shell prompt. If you''(from re experiencing some problems connecting to the board try with following guide : [[Using USB ethernet gadget to communicate]])''
In your Host Machine:
{{#lst:Using USB ethernet gadget to communicate|USB_linux}}
{{Navigation/IGEP Technology Guides/Getting Started/Ending
|Next_Step={{#lst:Template:Links|IGEP_COM_MODULE_Community_Guides_2}}
}}
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEP_COM_MODULE_Tech_Family}}
|Tech_ID={{#lst:Template:Links|IGEP_COM_MODULE_Tech_ID}}
|Name={{#lst:Template:Links|IGEP_COM_MODULE_Name}}
|Image={{#lst:Template:Links|IGEP_COM_MODULE_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEP_COM_MODULE_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEP_COM_MODULE_ISEE_Hardware}}
}}
[[Category:IGEP Technology Devices Guides]]
