Difference between revisions of "Getting started with IGEP BERLIN"
From IGEP - ISEE Wiki
m (→Ethernet Network cable) |
m (→Requirements) |
||
| Line 17: | Line 17: | ||
= Requirements = | = Requirements = | ||
| − | In | + | In this tutorial we are going to use the following peripherals: |
| − | * | + | * IGEP COM MODULE or IGEP COM PROTON |
| − | *5V DC power supply with a minimum of 3A current capacity | + | * IGEP BERLIN Expansion |
| − | * | + | * 5V DC power supply with a minimum of 3A current capacity |
| − | * | + | * TFT touch screen Seiko 7" |
| − | + | * Monitor compatible with DVI-D or VGA | |
| − | * | + | * HDMI/DVI-D cable or VGA cable |
| − | * | + | * Network cable |
| − | + | * Composite video cable, composite video output peripheral (PAL or NTSC) | |
| − | *Composite video cable, composite video output peripheral (PAL or NTSC) and a | + | * SIM card with an antenna |
| − | *Li-on battery with 3V3 (optional) | + | * USB keyboard and a mouse (optional) |
| − | * | + | * Li-on battery with 3V3 (optional) |
| + | * DB9 connector | ||
| + | * PC | ||
= Getting started = | = Getting started = | ||
Revision as of 12:43, 14 September 2012
|
|
Contents
Overview
This is the 1/3 chapter of IGEP BERLIN Expansion Tutorial Guide.
In this first chapter, we will learn how to connect some expansion peripherals.
Requirements
In this tutorial we are going to use the following peripherals:
- IGEP COM MODULE or IGEP COM PROTON
- IGEP BERLIN Expansion
- 5V DC power supply with a minimum of 3A current capacity
- TFT touch screen Seiko 7"
- Monitor compatible with DVI-D or VGA
- HDMI/DVI-D cable or VGA cable
- Network cable
- Composite video cable, composite video output peripheral (PAL or NTSC)
- SIM card with an antenna
- USB keyboard and a mouse (optional)
- Li-on battery with 3V3 (optional)
- DB9 connector
- PC
Getting started
Ethernet Network cable
Plug an Ethernet cable between IGEP BERLIN and your client machine (or any other network device with Ethernet connectivity). Use J3 connector with IGEP PROTON and J1001 connector with IGEP MODULE.
Connect IGEP BERLIN Expansion with IGEP COM MODULE/NEUTRON Board
The IGEP BERLIN Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:
Connect IGEP BERLIN Expansion with IGEP COM PROTON Board
The IGEP BERLIN Expansion connects to the IGEP COM PROTON Board through J1, J4, J9 and J8 connectors. Just take a look on the figure below to mount it:
You have successfully completed this chapter of the guide.
|
|
If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat | 
|
