Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Getting started with IGEP BERLIN

562 bytes added, 10:59, 10 April 2018
no edit summary
|ISEE_MainPage={{#lst:Template:Links|IGEP_BERLIN_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEP_BERLIN_ISEE_Hardware}}
}}
<br> __TOC__
 = Overview =This is the 1/3 chapter of IGEP BERLIN Expansion Tutorial Guide.
In this first chapter, we will learn how to connect some expansion peripherals.
= Requirements =
__TOC__   =Requirements=In these tutorials this tutorial we are going to need use the following componentsperipherals:  * IGEP COM MODULE or IGEP COM PROTON* IGEP BERLIN Expansion* 5V DC power supply with a minimum of 3A current capacity* TFT touch screen Seiko 7"* Monitor compatible with DVI-D or VGA* HDMI/DVI-D cable or VGA cable* Network cable* Composite video cable, composite video output peripheral (PAL or NTSC)* SIM card with an antenna* USB keyboard and a mouse (optional)* Li-on battery with 3V3 (optional)* DB9 connector* PC =Getting started=<div style="text-align: center;">{{#ev:youtube|bZ5WSB_n_To|500}}</div>==Connect IGEP BERLIN Expansion with IGEP COM MODULE/NEUTRON Board==[[Image:BERLIN+module.JPG|right|200px]]The IGEP BERLIN Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure below to mount it:<br /> <br /><br /><br /><br /><br /><br /> ==Connect IGEP BERLIN Expansion with IGEP COM PROTON Board==[[Image:BERLIN+proton.JPG|right|200px]]The IGEP BERLIN Expansion connects to the IGEP COM PROTON Board through J1, J4, J8 and J9 connectors. Just take a look on the figure below to mount it:<br /> <br /><br /><br /><br /><br /><br /> ==Enable IGEP BERLIN Expansion support==IGEP Yocto Firmware comes with IGEP BERLIN Expansion support. However open igep.ini, you can do this [[How_do_I_edit_my_kernel_command_line | checking following kernel cmdline parameter]]: <pre>buddy=base0010 buddy.revision=B;buddy=ilms0015</pre> ==Ethernet Network cable==[[Image:Berlin ethernet.jpg|right|200px]] Plug an Ethernet cable between IGEP BERLIN and your client machine (or any other network device with Ethernet connectivity). Use J3 connector with IGEP PROTON and J1001 connector with IGEP MODULE. <br /><br /><br /><br /><br /> ==Remote connection via Ethernet=={{Message/Information Message|title=|message=If you aren't using a Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to the board}}
*[http://isee.biz/products/processor-boards/igep-com-proton IGEP COM PROTON] or [http://isee.biz/products/processor-boards/igep-com-module IGEP COM MODULE].*5V DC power supply with In your Host Machine, open a minimum of 3A current capacity.*[http://shop.isee.biz/buy-online/accesories/tft-24-bits-seiko-7.html Seiko 7"] screen if you need a touch screen. *terminal sessions set up an Ethernet cable alias for your network communications.*A monitor compatible with DVI-D.*An USB keyboard and a mouse (optional).*4 pin connector for CAN Bus with another IGEP Board with CAN peripheral to follow CAN Bus communication tutorial.*SIM card with an antenna to follow Telit modem tutorial.*Composite video cableinterface, composite video output peripheral (PAL or NTSC) and a screen to follow TVP5151 tutorial.*Li-on battery with 3V3 (optional).*A PC.
= Getting started === Ethernet Network cable ==''' Basic ''' [[Image $ sudo ifconfig eth0:Berlin ethernet0 192.jpg|right|200px]] 168.5.10
Plug an Ethernet cable between IGEP BERLIN and your client machine (or any other network device with Ethernet connectivity). Use J3 connector with IGEP PROTON and J1001 connector with IGEP MODULE.connect to the board using the SSH protocol
== Connect IGEP BERLIN Expansion with IGEP COM MODULE/NEUTRON Board ==[[Image:BERLIN+module $ ssh root@192.JPG|right|200px]]The IGEP BERLIN Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors168. Just take a look on the figure below to mount it:<br> <br><br><br><br><br><br>5.1
== Connect IGEP BERLIN Expansion with IGEP COM PROTON Board ==[[Image:BERLIN+proton.JPG|right|200px]]The IGEP BERLIN Expansion connects an empty password for root user should work to access to the IGEP COM PROTON Board through J1, J4, J9 and J8 connectorsshell prompt. Just take a look on the figure below to mount it:<br> <br><br><br><br><br><br>
{{Navigation/IGEP Technology Guides/Getting Started/Ending
Francesc Megias
560
edits
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/7880...11452"