Changes

The board will connect to your DVI HDMI monitor via its HDMI connector. You can use a HDMI/DVI-D cable to connect the board to the monitor. Your monitor should be able to support 1024 x 768 @ 60 Hz720p, which is the default resolution used by the firmware. If your monitor doesn't have a DVI-D input, you can also use a HDMI input using a HDMI/HDMI cable, in that case you should [[How_do_I_edit_my_kernel_command_line | edit the kernel cmdline parameters]] and replace :  omapfb.mode=dvi:1280x720MR-16@60 for this one :  omapfb.mode=dvi:hd720-16@60